Separate names with a comma.
I use one of these- https://www.ebay.co.uk/itm/SPIDER-Steering-Lock-Stops-Ducati-Panigale-V4-1299-1199-/253571075793
yep I was just trying to be objective regarding the critic of my Google powers :) Im trying to HPI the car but need an old UK reg number and the...
hi Buddy, not on my Google search sadly , remember im outside of the UK so the results may differ.. those that popped up was Vin from...
Hi all, just a bit of a UK based question as im looking at a RHD car here in Germany and as I'm trying to track its history ( if its been a write...
Personally I don't like the Remembrance concept as it is at the moment, ( ill add I'm a 22 year Army Veteran just in case someone jumps the gun)...
I'm guessing the hammering action of the Air gun is deforming the socket interface. I personally only use a regular socket when using an Air gun,...
funny that was the same reason i had to strip my motor, as the gearbox output bearing failed..
also you have some adjustment on the rear frame by slackening the 4 bolts and nuts to the main frame and you can get some alignment from there a...
this is a topic i have been bouncing in and out off for the last 5 years or so, i have a 1965 house with an Oil burn water heater, and we...
that may be just a bit of oil weeping from the Rocker cover gasket, or you have some oil coming into the airbox and leaking down the head. if you...
my old EU 996s had Ti rods fitted to it as i had the motor apart for a rebuild
leaky fork seals are an MOT failure i think, as its a risk of brake contamination. i would expect the seals to be replaced and oil renewed by a...
i would say yo may have found the source of the issue as i was about to write to check connections and also maybe worth pulling the battery and...
i sit an easy swap between the 1199 and 1299 motor?? and vise versa?
any pictures Glen? sounds like a good solution
you have PM
possibly, but if you squeeze ( not crush...) the output hose of the water pump you should feel the pressure build up. i last did this on my...
if you remove the radiator cap when cold and start the bike, you should see a surge of fluid at the top, this is as the pump starts to push the...
if you can see the fluid level inside the radiator when the engine is running, you should see some evidence of flow if the pump is working
