Separate names with a comma.
Thats great thanks My measurement is about 4 mm less for both which is helpful as I need to aim for a slightly lower figure therefore
I have bought some aftermarket fairings for use on the track Does anyone know what size bolts and rubber well nuts are used to join upper and...
I recently did this for the first time after much umming and ahhing Used the facom tool Very easy to use and would recommend
No - only at the bar - can adjust further at bar if need be - wouldnt the torpedo adjusters do the same thing?
Bit of a weird one really Have a robby moto quick action throttle - have changed the cams because it was too quick for me from 1/6th to a 1/4 The...
cradle turned up and is great thanks Nick
Is it the ducati original part? Just looking at your measurements not sure I understand correctly but would it be possible to measure at points A...
I used my R30 for the first time today 'in anger' on my 748 which has got jacked up pegs and a lowered set of bars so quite aggressive riding...
How do these differ from standard discs eg the brembos on my 748? Will they fit the 748 and can you use ordinary pads with them?
Well - turns out had no staic sag at all on rear ! Have backed it off and now have 35mm total inc me aboard and 20mm ish static Back of bike feels...
1037SPS - I guess the critical tool measurement is from the bottom locating hole to the top (and bottom) of the tool top part / horizontal piece...
[ATTACH] This is scanned at full size so if printed can be compared against the tool (s) you have - obviously the screws are the exact centre of...
Ok So I have 165mm from bottom of fork seal to bottom of bottom yoke at front 265mm from centre of nut to top of ride height tool on rear fully...
I have been using sparkplugs and also the orange foam type but particularly in my left ear they dont seem to want to stay in - especially when I...
No massive rush just when you get chance - I will do likewise and paste it up here as should be useful for people to make a template from ?!
TBH not messing with the rake angle not least because of steering lock issues as will still be predominantly road use albeit fast road use
As my current earplugs just wont stay in I want to get some custom jobs Even better if they have a built in speaker I have seen a thread relating...