Separate names with a comma.
Not even close to reality, I bet all the front end needs is to be checked, loosened at the triples realigned and it will be perfect. The good...
I'm glad you can laugh off some of the crazy replies your getting. The bike is looking good stretta and it's sure to be a great runner. I have the...
Maybe call up someone who repairs windshields that have rock hits?
I think to check the frame you'd have to pull the engine to get all the measurements. One thing to check stretta is the shifting mech. The foot...
Take a look at these,Rizoma Fluid Reservoir Bracket-M6 I used these brackets as I put barkbusters on. It's a better set up than how they mount to...
Nice find stretta, I picked up a 2010 S for 5K and did a similar rebuild. Does it start? You might like this site, Used Motorcycle Parts, Ducati,...
I would add, Fix for the rear brake. Handguards that will stand up to a spill, especially as the brake and clutch reservoirs are attached to them.
If possible I'd look for a different dealer and contact ducati directly. benelux sound lazy. Most dealers have stepped up and contacted ducati and...
Try here at Andy's site it's a wealth of info. technical documentation
The rubbers broke on mine, so I got rid of them and made a washer for the inside, so they're now clamped solidly. No more wiggling.
I had the same problem when I fitted the bleeder, I just dremeled a hole in the seat for it to clear. It only needed 1/2" to clear.
I don't know what your point is as the Ducati manual tells you to grease these bolts??
Here's a thread with the same issue, that's recent. I don't think it's about over tightening, there are too many of the same problem and they...
I've noticed with the termi pipe and termi footpeg / exhaust mount that it mounts too close towards the tire. Even with the smaller american plate...
These are the stock electronic spec's. You can call Dan Kyle in the USA, although I'm sure there's someone local, he's very knowledgable on the...
You can use this one with an impact gun and it also works for the front axle nut.Steel Ducati 1098/1198 SF MTS1200 wheel nut socket
I always carry this and it works well unless the puncture is too big. [ATTACH] [ATTACH]
Here's from the manual. [ATTACH] [ATTACH]
Hey John, I bought the tool and springs from dan kyle, Welcome To Kyle Racing's Online Store Dan was very knowledgable and helpful with...
Had both seals done at about 12000 miles on warrranty. They also replaced one of the fork legs. Now 3000 miles later they're leaking again. I...
