Separate names with a comma.
Thanks. After reading the document I need 04111911A as well to fit the valve collets? Is that correct and do I need anything else? Also, while in...
Hello I got desmo service coming up for my 1098s which I'm going to tackle myself. Feeling pretty comfortable with the workshop manual, forum,...
Hm, maybe not injectors then. They won't go bad on the same time. Get the cable so you can check for codes. Only error i can think of besides...
I'm still thinking it's fuel related. Have you tried E5 fuel and injection cleaner such as stp? How was the rear plug? Also black? Does it run...
You can to some extent just eye them once removed, blocked holes or gummed up etc. Clean with brake cleaner and tap them like a generator. To...
If it's only on one cylinder. Have you checked your injectors? Could be slightly clogged/stuck open. Also, buy cable kit from lonetec...
Don't you have any codes that could point you in the right direction?
Thanks for the tip on the Max2H, gives me confidence in that the others will work. I'll think i go with the starter kit + Ducati adapter from the...
Don't know if this is the right category for my question but it's close to tyres. Anyone got tips on a good tyre changer and static balancer?...
Thanks for the help RickyX. If nothing happens i plan on swapping the case during engine rebuild but so far so good.
Update: i can gladly report that the jb weld Ducati has now done over 2 000 km without any issue. Let's hope it stays that way.
Well, this issue solved itself. When removing the forks the right one was making the clicking noise. After laying on the bench for a few days the...
After a short ride without incident on my 2007 1098s i have a horrible clicking noise which seems to be coming from the right fork. I can feel it...
It's not to late. Black goes to the left on the battery, right? ;)
I must not have had my glasses on when googling cause I found it right here https://jpdiag.xooit.eu/t4203-Late-to-the-party.htm No need to burn...
Haha... That's no help at all ;)
I'm about to connect my fiat 3 pin obd cable for the first time to my 1098 and have previously been told to check polarity so i won't burn the...
The immobiliser ring sits inside the OEM rubber cover and the ring is much larger than the ignition. I ended up taping the ring to the carbon...
Hello Just got a fullsix carbon key cover for my 1098 discovering there are no slot for the immobiliser ring. How do you set it or do you just...
A "case saver" which have been mentioned before could have possibly reduced the damage. I've googled but never found one for our bikes which you...
