Separate names with a comma.
No cap on the chimney pot then.
Whenever you use this type of car park keep the payment receipt which records the date, time, vehicle reg and amount paid then when you get the...
PROPER Monster! Nice to see that there is a following and appreciation for these bikes over and above the newer offerings. Glad you like it and...
Check the large multipin loom connector, often suffers from internal corrosion.
The next major jump in electric vehicle technology may well be if a manufacturer takes on and develops aluminium - ion batteries which could well...
Thankfully the other head is OK and just needs clearances checking and adjusting. Three hours wasted trying to do it on the bike which makes the...
Done, still a bastard job but at least the clearances will be easier and quicker to check and adjust now. :upyeah:
[ATTACH]
Correct Chris, my Ingenious answer has been to lose my patience, take the head off and do it on the bench. o_O
Trying to fit a closer spring on an ST4. Made up a forked tool from an old screwdriver but can't get the leg of the spring behind the lug on the...
By up and down I take it you mean ovality ( out of round). I had much the same and found that I had to find the high spot then loosen off the...
As per Andy's advice in post 7, Daytona. Dry, warm and comfortable. :upyeah:
You have to remember that they have max torque available as soon as they start moving and it stays there constantly. Poor old IC engine has to...
:upyeah: fingers crossed.
[ATTACH] Could always go for something a bit older if you want a shaftie, surprisingly good to ride but it's one heavy bugger to push in and out...
Kind of slowed down. Needs a rear brake M/cyl, managed to find a new one for £600 or s/Hand options at £250 or£150. Currently investigating...
Started on Bro in law's recently bought 30k miles ST4S, first job strip down and check rockers, R/H closer on horizontal inlet knackered, luckily...
[ATTACH] Bought this off ebay when I rebuilt my wheels recently, £65 delivered and worth every penny. No idea how to do link but try searching "...
There's a sequence made up around inner and outer spokes on l/Hand and r/Hand side of the hub which repeats itself, in this case every 4 holes in...
Got a link for that pls? :upyeah:
