Separate names with a comma.
Hi all Replacement carbs fitted with DJ 2 kit - and set up as per DJ instructions. Took a while to fire. Revs are erratic and don't seem to back...
From a m600 a year older than mine. They look to be identical.
Hi have seen some on eBay (same model and year too). Have bid and won. Hopefully be up and running soon. Many thanks for letting be know
Hi all I found and won some carbs off eBay. Chap selling them assured me they were working fine and that all screws are working/turning fine....
Just checked mine, and it would be for the left side/vertical cylinder. Never mind, but thanks for the thought. Will keep an eye open on eBay etc.
Many thanks for your swift reply. I'm not sure how to differentiate between left and right. But as I look at the carbs, with the float bowls...
Hi - pilot screw thread had gone completely (cannot seat pilot screw at all). Am assuming a replacement carb is now needed. If anyone has one...
Hi - disaster! :( Thread for one of the pilot screws has totally gone. Am assuming I'll need a new carb now - any ideas? will the 750 carbs fit a...
Have managed to change the jets :) Just needed a little patience and eventually all the screws came loose. Pilot screws are a pain in the a**e!...
Thought i would post an update. Needle assembly and springs changed with no fuss :) Am surprised at the difference of needle diameter and spring...
These are pictures of the kit as a whole plus one of each of the jet types. Both jets had a number engrave on the top edge (148 and 144). Am...
The exhausts are straight through and I removed the end baffles. The DJ kit was sold as new, via eBay - hopefully the seller was genuine. Will...
Many thanks for the fast reply. I have acquired a stage 2 dyno jet kit, but assume I'd need a stage 1 first? Is fitting a kit, or raising the...
Hi all I have a 95 m600 with standard set up carbs, k&n air filter and Leo Vince SBKs. I have heard that opening the air box will boost power. I...
Hello all, have been out enjoying re-learning the rope on my beloved m600. Have discovered a potentially worrying problem that has only started...
Going on the extremely useful information via Arquebus, the diameter of my spindle is 20mm - not 19mm as thought (given the age of the bike and as...
hi all - thanks for all the replies and advice. Have taken Kenoir's advice and today measured the spindle. To my reckoning it is a 19mm spindle...
Hi - preferably looking for the grey wheel, disc would be good but not essential. Cheers Danny
Hello all Am in need of a brembo front wheel for my m600 on a 1995 plate. Hoping someone can help or point me in the right direction. Many thanks...
