Separate names with a comma.
Possibly. I know the later ones are dark silver. IO thought this was the colour for mid 90's 916
If the chrome has completely gone you'll also need to check the surface of the cam lobes for excessive wear. If they have worn this will also mean...
I'm going to be doing the same thing soon. I have a 748 (2002) and have a set of pistons, cylinders and crank/rods from a 916 (2002 Monster S4)....
These engines aren't particularly fragile but what you're describing doesn't sound good. I would suggest that an engine tear down is required. It...
I'd persevere with it. However the job is a bit bigger now. Tat rust hole is the start. You'll find the area around it is very thin and so you'll...
If you're replacing the big o-ring for the unit that's a good time to change the filter. Rubber doesn't really like fuel or oil so will break down...
If I ever got into this situation, assuming the layup was not more than 6 months or so, get a good quality front and rear stand to get the bike...
Could be one of quite a few things. Some serious some not so. Fueling (pressure, dirty injectors insufficient flow as mentioned). Cam timing out...
Just remember, the date on the part doesn't always equate to the date of the bike. I once had a 2003 seat on my 2005 999 and I believe it was the...
It's one of those things; you could get by without changing them for 3 years and you'll be fine or the next time you start it you'll pop one and...
Use a hair dryer to soften the glue under the decals otherwise you be there forever and may damage the paint. Good luck. I definitely agree that...
For parts for the seat try this guy. Friendly service and an amazing range of bits including seats at good prices: https://www.corsasbk.com/ I got...
Sounds interesting. I'm in Perth Western Australia so there would be a bit of postage but if the price is right I'm definitely interested. Cheers
100% straight swap. Even the neutral safety switch is a perfect fit
I picked up a 1198 sidestand for $20 a few weeks ago and the difference is amazing. The only difference in appearance is that it is black rather...
I guess I'll have to screw it all together and see if anything touches :bucktooth:
Yeah. Poor proof reading. 916 cylinders and pistons, existing 748 heads. Thanks for the pickup.
I only know this stuff from hours of reading because I don't want to make a mistake.
Thanks for the replies everyone. Yes, you certainly can't put 916 pistons on a 748 crank otherwise all you get is a low compression 853. You can...
Hi All. I've had a look through the forum and can't really find what I'm looking for. I wonder if there is any experience or knowledge about what...
