Separate names with a comma.
The new rubbers not only improve the throttle response and the high idle when warm, they also improve the starting procedure. Having driven the...
[MEDIA]
While driving I noticed, that when the engine was getting warm the idle was rather high and took a while to drop down to 1200-ish. Had that before...
So put Lithium grease on the plates and put them in the oven at 200° for a while, which produces lots of smoke and therefor shouldn't be done with...
Grease? Well that escalated quickly. :eyes: [ATTACH]
I haven't taken a look at the clutch plates, but besides the squeak while driving off in first gear there is no further noise. Will probably need...
That's good to hear. I'm totally new to this engine and still have to get used to it and the noises it makes. Would cleaning the clutch with brake...
So it was the fuel filter between within the tube between tank and carburetor. Changed it and now she runs pretty shmooth: [ATTACH] Clutch is...
First ride, roughly 5 miles, drove half of them. :motorcycleduc: Bike started stuttering, engine went out and wouldn't start back up. After...
Great idea. And that's one shiney knob. :laughing:
Done a few more minor things and - after I install a final seal tomorrow - it'll be ready to go: [ATTACH] Agip stickers where put where the...
A band called Soen (lead singer is the drummer of Opeth, if I'm remembering correctly) [MEDIA]
Thanks a lot! Perhaps those parts have been replaced with the sheet-metal as it's an easier manufacturing process and therefor cheaper - the...
Yes. Yes, it is. :laughing: My RSV has the same circlip, it never fell of, even after changing the pads a few times, so I'll leave it as it is...
Someone I know had some Brembo brake spare-parts and he had a set of the parts I needed: New parts on top, "old" parts below. [ATTACH] As it was...
That would be great, thanks! That seems to be the right one! The stuff I ordered was used by the previous owner (or his workshop) so I looked up...
Could you post a picture of your rear brake so I can get an idea of what the original parts look like? These are the parts that I bought:...
Seems like a good idea, will get one. The fork will get new oil and I will take old rider's suggestion and go with 5er oil. I thought the same...
[ATTACH] Wheels are off to get new rubber, will be going back on Wednesday. [ATTACH] Looking much better then before. [ATTACH] New rubber hoses...
Yes, there are no cracks in the tubes, even the paint looks good, no flaking or anything. I also tried "flexing" by rolling the bike and braking...
