Separate names with a comma.
If professionally fitted the wires will be spliced in to the main loom under the cable sheath. Would pay to carefully peel back the outer layer...
Are you doing a lot of short journeys, this can cause this to happen. Take the bike on a long ride, get the engine hot and hopefully this will...
[ATTACH] 35lb barracuda, caught off the rocks in Antigua December 2016. This is why we go fishing, this went back alive as I did not have a pan...
You can’t mess with a countries national security, and not expect consequences. If he is innocent of all charges against him, why did he lock...
I spend a days fishing with friends, family or on my own. I often wonder where the day has gone, time just flies by whether you are catching or...
Not just for fishermen/women, my mrs loved every episode. Paul and Bob on TV is 30 minutes of pure chill out. And not afraid to discuss difficult...
Sounds like it may be a 10mm thread, worth trying an M10 screw, don’t force it it could be a fine thread.
Agree defo use etch primer if you want the topcoat to stick and stay. Clean off with a solvent degreaser before painting, will remove all traces...
You will be better off just buying a plug, rather than risk damaging the exhaust system.
Sounds like you may have a short across phases or the earth in the wiring or motor. Disconnect the motor at the connection box, take a photo of...
Why do you want to remove them? If no lambda is fitted or required just leave well alone. If you do need to remove them and there is no means of...
Get stainless cap head Allen screws ebay, toolstation, screwfix.
Try hammer type impact driver, these are a couple of quid from screwfix or toolstation. Put the screwdriver head in the slot, gently twist in the...
I think you will find the range is limited, by the length of the lead!
There were 7 books in total Adolf hitler my part in his downfall Rommel gunner who Monty his part in my victory Mussolini his part in my downfall...
Spike Milligan, a true original way ahead of his time.
A bit beyond the means of a home mechanic, most bearings in an engine will have the running clearances calculated with the shaft fit. Not many...
Fitting blind bearings, put the bearing in the freezer overnight, wrap it in a cloth. and don’t take it out until you are ready to fit it. Gently...
Careful Ducbird will go into meltdown!
I think you would be better off investing in heated grips, bark busters are Australian hand guards mainly for off roading.
