Separate names with a comma.
I'm sure this is going to cause a whole load of egg-sucking, apologies for that, but the leakage is possibly down to the fact that all UK...
Or don't run mirrors at all...
In a word, no. Monster and SS frames are a completely different shape under the tank.
Hi, making a 749 engine fit will be a serious amount of work in itself, the frame will have to heavily modified to make it fit, but then I guess...
Not frustrating at all mate, happy to help however I can! No, the problem is that the swingarm pivot (the 'axle' that goes through the swingarm...
Anything from an SS or aircooled Monster will fit for sure. The whole suspension set-up on the ST2 and S4R is the same apart from the swingarm,...
A picture paints a thousand words... [ATTACH][ATTACH] The ST2 (and all other 2v variants of the ST and 2nd gen Monster) has a diagonal brace...
Hmmmmmmm... not quite... A 2v motor will bolt into a 4v frame HOWEVER the bracing in-between the bottom tubes is different and would have to be...
OK, I'll bite.... My 1989 851 Corse replica Frame: Original 1989 851, powdercoated. 851SP alloy rear subframe Engine: 916cc from an ST4,...
Hi All. I can categorically tell you that a 4v engine will not fit in an SS frame. In addition to the swingarm mount width and bearing problems...
Chris Correct, I THINK the SS yokes might work, the steering tube is certainly the correct diameter. However, I don't know if the tube is the...
Hi Chris An ST2 would be a good choice, however bear in mind that although it has a 2v engine it's water-cooled, not air-cooled. If you're fixed...
Hi All I've finally got round to listing my 900SS on eBay: http://www.ebay.co.uk/itm/3310298810...84.m1555.l2649 Good luck! Darren
Hi Chris Single-sider on an SS = lots of work. An air-cooled engine in a 748 would mean building a 2v engine in 748 crankcases, air-cooled...
ST top yokes don't have risers, some Monster ones do. I think you need a bottom yoke from an ST2/3/4/4s or 2nd gen Monster (I believe they're all...
Just listed these on eBay: G Exhaust cams, very rare performance part http://www.ebay.co.uk/itm/3309451688...84.m1555.l2649 ST2 cams, good...
I run a push-bike speedo on my bike, with the sensor cable-tied to the fork leg and a rare-earth magnet (from Maplin) stuck (magnetically) to one...
Wow, I very much approve of that paint job (obviously!) Good Work. Darren
Hi, I'm in Poole in Dorset. Price-wise I have no idea, I'll get it up on eBay and see how it does... Cheers Darren
OK, found it!
