Separate names with a comma.
Agreed. Whilst the benefits of the Mechatronics are marginal for a well set-up bike running solo, it makes adapting to pillion and varying loads...
The 'squashed' well nuts are probably the standard ones - that's just how they look after being tightened up a few times! And the shearing of one...
Looks great: head races seem to only need doing once - they never put enough grease in at the factory but, once replaced, they're fine. A good...
Very useful post, Dennis - could you clarify this? Are you just rotating the main beam bulbs by 45° relative to where they'd naturally lock into...
Any diagnostic routine on a Ducati that assumes their "waterproof" connectors to actually be so is doomed to failure ;-)
Since the last big service and the throttle recall, mine has become slow-reacting to the throttle, but only when cold - I can snap the throttle...
Blimey! In under one minute, I find this thread, go "Aieeee, feck!!!" at the abomination shown, think, "at least it shows the engine off" then...
<waking up slowly> So, a Hyperstrada with a Pani-955 engine and luggage? At that point they've only got to give the thing a proper fairing and...
Good luck there - I live near the Green Welly and have a spare solenoid - pity I saw this 2 weeks too late. Green Welly owner is also an...
Sounds excellent - if it's toured Spain his year it's had some proper use, which is what these bikes need - it's the ones that sit around in...
Now if they'd put a fairing and a proper dual seat on it, they'd have my money - stilling missing a modern ST...
Mine was OK until I didn't use the bike for about four months last winter. It was all over the place at first but slowly improved over several...
Two of the options I'm considering are to go for a '14 GT if I decide that I like the Skyhook or to get a base model DVT then fit the full Öhlins...
Having recently geared down my 1200S (pre-DVT) and then ridden the DVT last week, the very first thing I'd do with the DVT is gear it down - it's...
Hmm. That's as in a, "What do I really want from a bike?" Hmm. I've just ridden the DVT back-to-back with my '10 1200S/Mechatronics and am not...
I think I got the following Friday's machine…
55,000 miles here and the only major issue I had was a knackered wiring loom that shorted out the ECU.
I had a CNC ride height rod made up by Pro Twins when I bought my ST4s - made ride height adjustment much easier and 15mm on rear height made the...
Do you know when the belts were last changed? If it's sat for more than a couple of years since they were last done, I'd recommend a change as a...
