Separate names with a comma.
Not really - if you've already got a 2D 'map' set up (straightforward advance curve), you just tell the Ignitech unit that there's a tps, and let...
It's pretty straightforward - best described in the FBG-amended Ignitech manual. Do you have a copy?
Try The Imageworks - www.bikestickers.com
Mine ran really rich at idle with 60's, and the slow fuel screw screw made no difference whatsoever. Went down to 55's, which cleaned and...
I'd second Dukedesmo - Rerouting the pickup wires as far away from the coils and ht leads does give a noticeable improvement - much smoother. I...
I've used a tps from a 250 Aprilia. I picked it as I didn't fancy modding the fcr spindles - this one is lever actuated, so only required a...
When I rebuilt my motor, I had the crank/rods/pistons balanced by DTS - he said that it didn't really need doing, as it was pretty accurate out of...
Might be worth trying these people: Engineered for composites | bigHead Bonding Fasteners They do a range of fasteners designed to be bonded to...
Not sure what the what the standard projection of stanchion above top yoke is, as standard set-up dimension is taken from the u/s of the bottom...
That's why I'm using a RW item - the original is tucked safely away! Sent from my P01M using Tapatalk
If you're going for originality, why not just polish them? they're stainless after all. Sent from my P01M using Tapatalk
Flodden would do for me. Sent from my P01M using Tapatalk
I had my rear Showa rebuilt by Maxton a few years ago. At the time, they advised that replacement seals weren't available (we ended up making one...
I doubt the as internals would work in non-adjustable forks - the forks wouldn't have the correct bottoms, with the requisite damping adjusters...
They're M8, actual length to get them flush when nipped up is 33mm. Sent from my P01M using Tapatalk
My MkV frame ('96) has both, the actual lock was positioned as your photo. Not that I ever wanted to use it, but it's a totally useless location,...
When I fitted the Ricambi one, I modified it to get easy access into the hump - the two seat pads remove as a unit, which also eases things if the...
PM sent Sent from my P01M using Tapatalk
Would be worth having a word with Bike Colours - I found them very helpful, and they were able to match my original colour absolutely perfectly....
I'll try and dig mine out tomorrow (still got floating caliper, but different torque arm arrangement now) and have a look. Sent from my P01M...
