Separate names with a comma.
OK, got the tank lid surround on! Figured out the process... Need to take the black rubber seal off completely. [IMG] [IMG] Leave the green...
I like the gold heads! I had my engine stripped then got to work on the separate bits. I used paint stripper and a dremmel for most of them. I...
These are very reasonable - paid a lot more for a Carbon King front mudguard recently. But it is great quality and very strong. I inadvertently...
do you have to build some sort of compression tool to get the tank rim back in place? to frightened of my paint job to hit it any harder
Took Al's advice and removed the inline filter from the return fuel line... Changed the in-tank fuel filter. Difficult to get the pump back in...
I have a data sheet that claims: "Product should be suitable for prolonged or repeated contact with these substances, under the conditions...
I warmed the pipe in the oven - used silicone spray - if I were doing more, would look at the correct tools for the job. I'm not that strong and I...
Be my guest! there are still potential problems ahead: 1) the connectors are very close if not touching the rear shock - not sure if that will...
I have been fighting with fuel line for a bit... I wanted to have a clear line if possible to see fuel. I also wanted some in line fuel filter....
OK - new success! I am replacing every bolt with stainless or titanium (well there are two exceptions so far). The side stand bolts are unusual......
Yep - but so worth it!
To cheer me up! the post came today - lovely sprocket nuts! race drilled titanium from Titanium Fasteners for motorsports and competition...
Mine are from Earls - and get Goodrich banjo bolts - they look the biz! http://img.jpcycles.com/zoom/240-777_A.jpg
One step forwards, two steps back... Broken tank catch! Just screwed the B^&gger on - gave it a go and 'crack' [IMG]
Great idea! much better than my painted efforts
If you are replacing the pins - you could go Titanium! Ducati titanium sprocket drive pins | Ti64 The 900SS pins are a simple thread, none of...
It's getting the old ones out, thats the problem!
Just had to purchase a single pole side stand switch for £47... I stupidly broke the original during the stripdown. Funny how some parts are so...
i would buy new pins and see if that does trick
Just tried my carrier (pins) in the cush drives (wheel) and it is a tight fit, no play. Relatively easy to push in and out, but no axial play....
