Separate names with a comma.
I have a very understanding dealer. That said I know the risks in terms of the warranty, but this is the fifth bike I have done now and...
A few more bits and bobs today. Fitted new pads to the rear caliper I transferred over from the previous project, then bolted it back onto the...
I yet may, but not at present. If I do, then it will be the complete set.
120bhp is a huge drop in power from the older V2 engine which was kicking out around 155bhp (in the Panigale V2 anyway). I am guessing this engine...
More from MotoCorse. Here's one of the four front frame plugs. These comprise of the main frame bolt, cap and allen retaining bolt. I have not...
So it looks as though the aforementioned clearance is good, which means I can fit the front frame. Hallelujah! First job was to sort out the all...
Whilst I wait for the Cerakoted parts to return, I need to check the clearance for the aluminium radiator pipe in between the frame and engine, as...
Just ordered some special titanium bolts from TGP MotoRacing in Germany, that are specifically made for the MotoCorse rear linkage, rocker arm and...
Well it is 100% not a genuine Superleggera. Subframe is a real give away as is the front frame, neither of which are full carbon. Rear wheel cover...
So one of the issues I have had to deal with are some of the extra or modified parts that come as part of the full Akrapovic exhaust sytem, that...
There's a substantial pile of them destined to be fitted to the bike, so fear not.
Yes your posts were one of the reasons I opted for this setup. That and TGP MotoRacing in Germany, who are long running exponents of their...
Torx head ½ turn fasteners, the sprocket is held in place very securely once they are tightened.
Lots of overtime at work helps! :D
Some judicious use of enamel paint and an hour of my time before refitting the sprocket assembly and titanium rear nut back onto the bike....
Fitted the cush drives to the quick change carrier. [ATTACH] Flange fitted. Sprocket nuts torqued to 44Nm (as per the manual) with a dab of...
Time to start adding some parts to swingarm. This time Pro Bolt M6 x 16mm dome head bolts and M6 x 3mm collars. These combine to form the chain...
Parabond 600. Works like a charm and is very similar to what the factory use.
Now that sadly Lieb Carbon are no longer making carbon parts, I had to make up a template to create the foil bonding panels (that were originally...
Seat pad shielding installed [ATTACH]
