Separate names with a comma.
If you look carefully at the front of the fuselage, one of these guns has been fitted to the Mosquito. [ATTACH] [ATTACH]
Looks like the damage to the spacer might be pushing at the seal lip. If you can't find spares, try flatting them with fine emery paper on a flat...
[ATTACH]
Nice day for it :sun:
BMW twin turbo v8. After realising bmw main dealer mechanics are baffled by anything more than an oil change i decided I can do a better job....
The cover?
Three members of crew at work on the starboard engine gantry of a Royal Navy Air Service North Sea type non-rigid airship during an anti-submarine...
I have one of these in my car and it's a bugger to work on.... [ATTACH]
I'm actually doing a BSA bantam barrel at the moment and it's got a lovely lead in for a small piston. This one is will put the piston on the rod...
When i do pistons I always buy a few extra circlips in case they make a dive for the corner of the workshop or I bend them
Going by the front end I think it's a modified CX500 with a turbo rather than an official CX500 turbo
Make sure you get the wire polarity the right way round
Bevel lead in is a lot better than on the 748/996 cylinders
Hours of fun on a gallon of petrol. And less than 50p a gallon as well
I'm always looking at learning new ways of doing things. On these engines you have put the piston and rod in from the top as mentioned by @Robert...
