Separate names with a comma.
Rieju MRT50. Minarelli engine. 6 speed gearbox. Available from Ayr Motorcycle Centre. Or Derbi Senda X-treme 50 R or SM. Both are built in Spain...
Too big for me as well. Standard GS is OK but the GSA is a monster. The pre water cooled boxers are pretty much indestructible. That said...
Hopefully they've sorted out the issue with spokes loosening off. It was a couple of years ago so I'm sure all's now in order.
There's a connection with Ducatis though. At least there is on the older Goldwing engines.
My money is on a vacuum issue (or lack of one). Is it worth checking the diaphragms? There's no logic to it but it's maybe worth a go and they're...
An increase of 3db equates to approximately twice the sound intensity and acoustic power.
The factory at Varese wasn't the 'old MV factory', it was the Cagiva factory (at the time) and is now the current MV factory, as the second...
If it was my bike I'd want the oil pump checked as part of the repair. If pump pressure is below optimum logically it's the vertical cylinder...
The rear cylinder head is always going to run hotter as the exhaust port is facing the wrong way. It's a carry over from the 750 sport when Ducati...
Take the manifold rubbers off and inspect them for cracks, opening them out as much as possible. It's the only way to be sure. I doubt it's a...
According to the BSD (Bike Sport Developments) website: Standard is a yellow band (IWP069). Upgrade is a violet band (IWP189). Both Magneti...
You and me both! Modern electronic systems on motorcycles have all the complexity of a smartphone or laptop and they're exposed to the...
I'd be pursuing the possibility of water ingress, if the bike was running fine prior to getting caught out in the rain. And primarily for the...
Sounds good, although if you've not owned the bike from new, the actions of previous owners remains an unknown.
Do you ever start the bike up and let it idle (especially during the winter), without taking it for a proper run?
Loose engine mounting bolts/nuts allowing the frame or engine casing to flex.
Following on from the water ingress theme this connector is right in firing line. Just a hunch.. [ATTACH]
It could be worth disconnecting the battery negative lead and leaving it for around an hour. My understanding is that ECUs can retain current even...
Fair play about the manual but if you've got a flat gasket face and a new gasket there should be no requirement for sealant. And as you say...
In addition to removing one of the external oil lines to check flow/supply you could try pouring oil down one of the oil cooler lines to prime the...
