Separate names with a comma.
That link makes for an interesting read. CR10EIX or CR9EIX then. I'd want to line them up to check the length, as there's a reference to a slight...
Good call. And yes it's sounds like a definitive on the model would be helpful. I just looked on NGK's website and that's what was listed. For...
Like for like: NGK MAR9A-J (6869)
Numb bum is a consequence of seat width and lean angle. For comparisons of riding position by model the Cycle Ergo website is worth a look, as...
You need extreme heat or pressure or a combination of both. Currently any working system, at a test level, consumes more energy than it generates...
That's the biggest issue. Until there's a wholesale commitment to updating the ageing nuclear fission infrastructure (other than Hinckley Point...
An approximate way of calculating cylinder compression value is to multiply atmospheric pressure by compression ratio. Depending on what bike...
Even if the dash is faulty (or on its' way out) then wait for it to fail. Then repair or replace as required.
If the bike's running and charging OK, what's the problem? The dash readings are always going to be out and pretty unreliable. They're only...
I'd spend my money on a degree disc and a dial gauge (ideally two). It's the only way to get a definite answer. Based on the specifications in...
No problem at all. Yes indeed! Adjustable pulleys do seem the way to go. That said I'd be interested to see what happened if valve overlap was...
I'm glad I mentioned the manual as the copy I have only goes up to 'E', which is listed as 10°. My feeling is to place it in the advanced...
You're welcome sir! Most of the time I'm not sure if my comments are useful or not so that's nice to hear. This is a difficult one. A couple of...
If it 'aint broke don't fix it! Some of the old aftermarket systems just keep on working. I had a Boyer system on a Laverda 750 that worked...
All you can really say is that an advanced inlet and retarded exhaust would equate to maximum valve overlap. Similarly if the inlet was retarded...
According to the blurb it fits straight in the AB11 case but the AB5 needs to be modified. For £75 it's probably worth trying but beyond that...
Your post suggests everything is back together but if not, the safe option is to refit the key in the advanced position (on the exhaust camshaft),...
Have you ridden any triples Pauly? Ducatis aside I get the impression it's what you're looking for. Street Triple 765 or 800 MV.
I enjoyed reading that. Thanks. As you may of gathered I'm of the durability mindset! I expect the clutch on my Guzzi to last for at least 60,000...
Good perspective on production efficiency vs. workshop use. I'd never really considered that. Steel still seems like the more appropriate...
