Separate names with a comma.
If it had 2 wires I would guess you could do a continuity test across the 2 wires and press the end in to check, but not sure what to do with one...
The switch is a spare and off the bike - just wanted to check it and make sure it was working. Cheers Gaz
Hi Derek Its one of these. https://www.stein-dinse.biz/advanced_search_result.php?inc_subcat=1&keywords=037012590&x=0&y=0&categories_id= Cheers Gaz
First Iam NO electrician I have a side stand switch with just one wire on it. Could anyone tell me how to check it is working / making a contect....
Sorry, yes its a 904cc 2 valve. Did not say in the title of thread, but I am talking about the closing rocker. I think you are correct about the...
As mentioned before this reno is taking a while. I installed the Horz cyl head closing rocker arms a while ago, and have just done the Vertical...
Is that the condition where you throw money into a bottomless pit. I just unwrapped some parts from newspaper I put away and the date was 2011, so...
I just cant help it. Cheers Gaz
Done. Had another go with puller but kept slipping through. As Arquebus said try and split it. I use a Dremel type rotory cutter with about 2-3mm...
Mark as per picture there is no pressing out. The 20mm I.D. bush has about 2mm wall and pressed up to a small shoulder so the best I can get on it...
All, Having been inspired (again) this time by Andy's Motorcycle Obsessions I set off sorting my casings out. They have been aqua blasted. The...
Cheers
Diagram does seem to show arrow pointing AWAY from tank. [ATTACH] Sorry - I think I made things more confusing. Cheers Gaz
2 things. When I stripped my tank I think there was a small breather hole in the filler cap, I think you could see it under the key flap. Also, I...
ck_uk Spot on, glad it worked - looks good. Cheers Gaz
ck_uk, To me I think the cast letters and oval boarder are cast higher than finished size, painted then milled/machined and the tops taken off...
Portboy, Had the same problem, have a look at post below. Front Brake Microswitch Must be 6 or 7 years in to my reno, but I think I have turned a...
I got one out by screwing in some theaded bar into the conical nut and then thightening a nut against the cone head and the putting another nut...
Desmo, Have a look at this thread. Splitting Casing - Help Cheers Gaz
I bought some originals, measured up, and modeled in Autocad Inventor. I have the profiles or can slightly change if you give me some dimensions....
