Separate names with a comma.
Don't usually comment in this section and was going to give Birdie an "Agree" but really wanted my own reply, so here goes. He's a prick and I...
Glad its off. Have a look at the thread I mentioned previous. I found a great difference in viscosity between manufacturers 5wt 7.5wt 10wt light &...
Mr S I have just replaced my oil see thread below https://www.ducatiforum.co.uk/threads/forks-standard-1992-900ss.57382/ I thought I had slackened...
My ref to the primary gear was for Simons benefit I have already done mine in thread below. Splitting Casing - Help Cheers Gaz
I have been concentrating my efforts on the blanking plates. I think I have the profiles as close as I am going to get them and have ordered some...
1992. I was taking heads off anyway but did not want to split casings. I thought I had got away with it but on closer inspection I could just see...
Yes, had not thought of that. Cheers Gaz
Simon, Mine was backing out at 12k. Cheers Gaz
Exige, Thank for your comprehensive reply, but I am still a bit unsure. I search all over for something that looked like the switch. I have also...
Patrick, No problem, others have brought this issue up in the past and have been meaning to look into it, it might help someone else. Cheers Gaz
Thanks a lot Derek. Do you know what bike it's off. Cheers Gaz
Hello, Can anyone identify this neutral switch. I bought it not really checking my existing one which the wires had snapped off. I have just been...
Hello, I've been meaning to look at this for a bit. I had a quick measure of the spring and think the rate is about 16 N/mm. I though I would...
Thanks Hejira / Mr R, I think I am going to have a concerted effort to get some blanking plates, thinking back I put some smaller components in...
Thanks all. Regarding preload for new bearings I thought there was a preload, not sure what it is off the top of my head will look up, but on a...
Ducv2 / Bootsam Thanks for the tips. I did heat some rocker end caps to get the bearings out and about 100C was the temp when I heard them drop...
I know I am going to get hammered for this so fully expect it. The reason I have stalled with the reno is I need to clean the casings up. I am...
Few pics [ATTACH] [ATTACH] [ATTACH]
DucatiChappie I have loads of photos I took when stripping mine. Depending where in Derbyshire (I am around Worksop) you can have a copy, or if a...
Simon, I have not got any experience on the electronic ignition models but the torque figure you mention seems a bit high - appologies for...
