Separate names with a comma.
Sorry Derek I hope you are not getting frustrated with me, I do value your input. So yes, the bearing in the end cap + shim just support the...
Sorry Derek, when I was talking about the outer bearing it was the one on the pulley side not the one in the end cap. Cheers Gaz
Yes, I am OK with that bit and realise there is a shim on the shoulder of the cam shaft. What I am trying to avoid is - If you don't get the outer...
Derek, Thanks for your input. I pressed the outer bearing in with socket I had lapped the end of. It was very flat and contacted both inner and...
First, installed bearing in Both cylinder heads. Horz & speedo drive worm spacer seems OK nice free movement gripping worm drive. Vert with plain...
Nice one.
Who's seat did you go for? Cheers Gaz
Dukedesmo, Yes basket out tapped holes and seal visible, like the tip about leverage from a dowl in the oil filler hole. No vented cover...
All, Anyone got tips for getting the clutch case (not cover) off. All 10 (is that right) bolts are out and I have given it a bit of a whack with...
Well finally reached a milestone - inserts done. As I mentioned before I had a jig made. I located the jig and guides with the 8.5mm tapping...
All, Never assume. Well here I was ready for an early night when I just kept thinking I wonder what the story is with the black boot thing. Well...
All, From others I am getting the impression that some have spade connectors and some are pre-wired, so it's worth checking what would suit your...
Jeff, At these prices that would equate to just under a 1/3rd of a pint. Cheers Gaz
Hejira858, I can't remember seeing one on mine, but saw it in all the ones for sale on ebay. Then I came across it for sale separate so thought I...
All, Just fished mine out again. Basically they all seem to be pretty much the same - difference being terminal type & contact configuration. (I...
Hejira, I've got some info on the switch, they are "cherry" brand and I got mine also from RS. They did not come with the little black cap but...
MacBulldog, The part diagrame looks to be from another bike, presume the 400. I have a similar parts manual for your year and size of bike....
MacBulldog, Got some more pictures and photos at home but here is a start. http://litetek.co/docs/LiteTekCarbDiagramDucati.pdf P.S. Nice clean...
Welcome, You could perhaps give me some tips, I am 3 years in on a 92 reno'. They're right, we do need pics. Cheers Gaz