Separate names with a comma.
Brentz250, I have the spindle out of my 92 900ss if you think it's the same (17mm thro' bearings) I can measure let me know. Cheers Gaz
Richgilb, Agree with WAH900, the cone is locking the swing arm to the outside part of the bearing which is pressed in the wheel. The small part...
Tricolore, You can get new seals, got them a while ago but have not changed them yet. Mine had gone and all the paint on the back end of the...
Gold Cheers Gaz
Wolfram, Got some information some where on the white, I will find it out, but i think it is bought as a base coat (sorry I am not up on paints)...
All, In the intrest of health and safety (boooooo) I feel I must warn against using sand, please do some research as it can cause respiratory...
Agree, bags, felt tip (biro), pictures, boxes and more pictures, especially of wiring route as said (so I can use them), write on where bits go,...
Adecarcer, I used a small dremmel type tool with some of the small cut off blades. I cut through the outer and removed the cage. The cut through...
Wolfram, I remember how exited I felt when I got my 92 J plate black wheels. 3 years later the frustration is starting to creep in but to be fair...
Cooky, Should be a link to the filter in this post. 750SS project begins 750SS project begins | Page 2 | Ducati Forum Cheers Gaz
richgilb, [ATTACH] Carby 900SS. Not sure if this is Standard but it was how I got it and it will be going back like this. Cheers Gaz. EDIT:-...
I have a small bum bag made out of an elephants foreskin, but if I rub it, it turns into an overnight bag. Cheers Gaz
Hope this is some help. http://www.toyota-tech.eu/wire_harness_rm/RM06H0E.pdf I spent the best part of the weekend putting in some tow bar...
Adecarcer, Whatever size it is I believe you need the correct grade for fully submerging in fuel "R10". See below - I got this from somewhere....
Steve, Many thanks for reply. I have chosen the "time sert" bushes. I believe the helicoil and time-serts bushes are the same thread on the OD -...
Phil, You can pick our brains but don't pick our noses, hello. Cheers Gaz
AL, PS......No dissing intended, but I reckon you are thinking about it too much...... - No problem AL I know my faults, That's why I pointed...
AL, Thanks for your reply, I can see you understand the point about the outer race dragging behind or being pushed ahead of the inner race. I did...
AL, I understand your explanation which is once again comprehensive, thanks But, I am still not clear on positoning the pulley side bearing....
That did cross my mind. Anyway what about this. I have been going down the path of pressing bearing in on "outer" as thats where it's located....
