Separate names with a comma.
No. In order to use a new key set/barrels, you must have one of the original coded keys to access the reprogramming. The only way out when both...
You need the 868 MHZ kit. The 315 is for Japan only. The part numbers you've listed don't exist on the parts system? The correct number is listed...
There’s another benefit of fitting the Ducati kit. As well as the ECU mapping being upgraded to suit, the chassis software is also adjusted to...
HT leads do cause problems. There's updated parts available. Worth doing all 4 with the updated ones.
Having lost both keys, you need to replace the handsfree unit. There is a kit available that covers all the parts needed including the filler cap,...
It's not a service item. Iirc, they're M8 so 25Nm should be about right. I wouldn't go to 32Nm as you don't know the tensile grade of the Ti bolts.
The biketrac should fire you a warning on the app if the bikes voltage drops below a certain point. If it didn’t, there’s a possibility I guess...
It's probably the battery. Despite what the optimiser says, it can only go on the fact that there's around 12V which just means the plates haven't...
Sounds like a bit of an internet rumor tbh Paul. There have been reports of a few isolated failures on spoked rears, but there's nothing from...
Sorry, no. I didn’t make them, I brought a half dozen or so in from Italy. I don’t have any left now.
That's the tail light connector. The rubber sleeve around it fits into the seat base to retain in place
190/50 is the correct fitment. Although standard fit, the 190 is too tight on a 5.5 hence people fitting 180's back in the day
Not all, but many new bike purchases are now on PCP. It’s not really a case of paying the list price any longer, but more can the monthly payments...
Steve has packed up…. I’ve started using Apex at Codnor. Very good and not too greedy on his prices.
Part number 85210241A. They're about 11p each. Any dealer should be able to supply/post
You need to use low profile cap head or mushroom headed bolts. Even fitting stock cap head causes interference issues on 748/996 stock setup.
Most likely, but worth knowing for future parts orders. The Ducati parts system doesn’t pull it up from VIN number due to age. You need to delve...
You need the 65540021A by the looks of things. That lists for VIN numbers 004463 to 9914. The '11A part number is for bikes up to 4462. The VIN...
It's an update to some of the engine management strategies. The update has only been published in the last few days.
It will be happening. Some installation instructions are already up, but they are going to go completely online during the coming months. No...
