Separate names with a comma.
Billy, No that is not it. If you do a search on it you will find some pictures. you can only see the side of it and may be the end ofthe slot if...
Billy, While you have the heads off check the crank oil gallery plug is not loose. Cheers Gaz
Billy, Glad all is OK. I presume all threads are fine that's a result. Good pics nice man cave. Cheers Gaz
Duke, I had a look at galvanc corrosion a bit ago and I thought like the fire triangle you had a triangle for this. Remove one of the sides and...
I am not sure they originally used loctite, I can't really see any evidence and it does not refer to ot in the Ducati workshop manual. It only say...
That's better. Cheers Gaz
I don't get offened that easily, I at least expected someone to say " 2.15 at Kempton Park Number 3". Anyway you missed your opportunity. Thanks...
Now why did I expect a serious answer, now come on chaps can someone give me a tip. Cheers Gaz
I have tried resizing my Avatar in Microsoft paint but it still comes in cut off. Can any one give me any pointers. Cheers Gaz
Billy, Bugger. sorry to here that. It was the Horizontal wasn't it, is there any stud sticking up, presume not. I though mine was going to snap...
Billy, Sorry you are having the same problem. I had same on horizontal but they came out OK. I bought a set of roller type (3 rollers inside...
1037sps Thanks, its always good to hear some practical experiences. Cheers Gaz
Many thanks for replies. I had a look and yes it is a long way, I don't go that far on my holidays. I don't really trust posting either. Frozen...
Thanks to both for replies. I would use a heli-coil on the part of the casing which was used for fixing a bracket to or holding a cover on but...
Well, as previously reported the studs are out, but have 2 cylinder head stud holes in the casing that require mending. First has anyone made...
All, thanks for replies. Well they are out. I would have picked the worst one first. On the vertical head the front right and back right were...
During this exercise I have considered the resultant torque transfer due to the twisting effect of the stud shaft, the possible adverse effect on...
Chaps, Thanks for all suggestions. New stud remover in hand will go at it with a bit of heat and some penetrant. Agree torque lower down thanks...
Yes I have looked at previous posts and internet information. Trying to remove studs from vertical culinder all unbroken and believe all original...
Welcome. Parts catalogue look on site below or PM me. all the best with reno. Stein-Dinse GmbH Ersatzteillisten Cheers Gaz
