Separate names with a comma.
Sorry - photo didn’t load. [ATTACH][ATTACH] [ATTACH]
You might still be able to get these (FleaBay, etc.). I used them on a Gixxer 750 and they seemed to help. The idea is the mass inside the bar is...
Thought this was pretty good . . . [MEDIA]
Mother Nature . . . [MEDIA]
Matching wheelie bins???
Hicky’s F3 Workshop Tour video for those that haven’t seen it. Gotta love the three-cylinder howl: [MEDIA]
That looks like it will work just fine. I had plenty of ‘rona time to work on my version .
I just fitted the NGK plugs but haven’t run it yet. Coil sticks seemed to “click” onto the plugs just fine. If the Champion plugs weren’t many...
Made a tapered spark plug socket with a 16mm deep-well socket, drill press, file, and some fine-grit wet-or-dry sandpaper. I noticed in the 999...
Early 1980s Kabuki track bike, which was gifted to me from a friend a couple years ago. We used to ride a lot back then. His neck and some other...
Thanks for the quick reply! I’ve been debating whether to “extend” the scheduled valve check interval to the next belt change and not disturb...
Quick question on removing 2004 999s fuel tank. Bike has 6k miles and I’ll be doing valve clearance check, belts, general clean up, etc. over the...
That sound like a good mod and something I’ll do in the near future! What did you use to bond the stainless plate to the aluminum?
I leave them on for an easy option to use a rear stand with the cast swingarm. The other options I’ve used are: 3/4 inch stainless steel rod...
Gilles adjusters and lifters, and a drillpress-and-file modded socket to deal with the axle nut. [ATTACH] [ATTACH]
Thought I’d do an intro since I’ve been lurking on the site for a while and there seems to be an abundance of time these days. My bin picture is...
Really nice design! Awesome work!
Just looked at my bike closer (bike was new to me this winter) and realized the adjuster doesn’t thread into the swingarm itself. It’s just...
The stock hole at the front of the recess for the threaded adjuster seems like an option rather than a bolt parallel with the axle through the...
What Sev said. I've got the Pit-Bull 999 rear stand for the cast swingarm. It actually works quite well and feels very secure but is a bit fiddly...
