Separate names with a comma.
Ricky is it the latest iteration of the RCS19? any pics
I removed the location pin , no full lock the brake lever hits the Rev cluster ; will have to stay where it is and a Ducabike switch will need to...
Thanks!
Any advice to remove the brake master cylinder location pins on the handle bars , I am installing RCS19 and they do not have provision for the...
Thanks ricky I just threw it there for the picture, there is a pin in the underside of the handle bar, rcs don't have provision like the oe...
Everything is fitted, only issue I have come across is the Brake side, OÉ kill switch won't fit too, there is what looks like a stop pin on the...
Can somebody educate me on all the different clutches available ? What is best suited to go from the OE 2002 Clutch for road/track use . get the...
Thanks Ian I was looking at this setup to retain the or lines as I just got giodridge recently [ATTACH] [ATTACH]
Ian, did your brake lines fit, banjo bolt in the same position ? Aftermarket banjo bolt needed? Where did you get the bracket for the reservoir
I am under the impression that it is an underlining problem I found I started missing gears, and finding neutral more
Thanks , was curious if they worked :ducati parts manager wasn't too sure
Pop quiz hotshot, How did Carl fogerty racing the 916 type model, last a race with a dry clutch, fluid in mine after a few laps is black as the...
Did anybody install RCS19 brembo on their 748,9xx
Yes , dont use autosol ; you will scratch the be-jaysus out of them Autosol has a fine grit in it The lint free cloth is used to prevent...
Thanks Dave I got the kits for the 748 off a few places before to find out they are the wrong sizes
Depending how bad yours are , they may need to go to a polishers with the appropriate equipment Get some White Diamond and a lint free cloth ,...
I did Steve ; I put some injector cleaner in her and did an italian tune up at a track day She is running sweet ever since , the hiss sound on 4K...
Rear disc bolts Anybody know the length? M8X1.25 in the manual but no lenght
Quick one, looking at the manual , its M6 X thread pitch 1 What is the length , mine is rusted , would like a titanium
Its the little one I am clueless to where it goes , 4 large are between the frame and rearsets alright I don't have a notion what they mean by ,...
