Separate names with a comma.
You can buy the Ducati mounting kit for a lot less than that. The mounting plate is available on its own too. I think it was around 30GBP (at...
As peter says the rubber seals were also modified to be a bit deeper. On my cases I pulled the seal out and put some 3mm (might have been 5mm)...
Nice one Alan :upyeah: Pro Twins are well respected, and I see a bunch of my friends migrating to use them than other dealers in this area....
At 10k for a 67 plated 's touring, that's where my money would be. Besides, if the 2010 bike has negative history that will never improve, so...
it's not 180 degrees out,its one revolution out. One revolution is 2 cycles (piston down and up), so 2 revolutions required for a 4 stroke between...
So if both engines that used to run perfectly now don't, and you haven't touched both of their timing belts since they were last running, its not...
I would think any issues with the 2010 would have been addressed by now, and as Coman says not all of them had issues anyway. I wouldn't let that...
Since the plug is wet it does sound like an ignition issue. Does the coil pack properly engage on the plug top ? Also check the lead where it is...
Does that include a cat bypass, and is it Enduro specific or will fit the 1260 too ? [edit: just found it on line, not a bad price for the...
Now that looks very nice ! :upyeah:
Nice one Chris, that was possibly the same cancelled order I got offered. Looking forward to hearing your views once its arrived :cool:
Dar, the ohlins are superb, I'm sure you wont regret it. The auto adjustment is great but only if you like swapping modes or loads. Mike Willis...
I might regret saying this, but I've never had to change a clutch slave cylinder in ~20 years of Ducati ownership. I know I've probably been...
Thats true when cruising Richard (IAM Advanced pace), but when pressing on (aka 'Ave it' pace) especially when fully loaded, my brakes get used a...
If Only, thanks for 'disliking' my 2nd post in response to mroberto :thinkingface: I have no idea why you dislike it, but I stand by what I've...
I understand why, but despite the nut being thin the socket forces are on the outside and the spindle will stop it collapsing. In terms of...
gert, is that on an enduro ? OP is specifically asking about an enduro, and I didnt think Ohlins made a spring for it (for a start I think the...
Roberto, it is the rear brake that is the issue in this regard because both the slave and master cylinders are below the abs pump. It therefore...
noobie, that will do both front and rear, but you simply don't need it. They are great if you want to carry a socket on the bike for emergencies...
I would suggest taking it to your local friendly bike mot place and ask them to put it on the brake test rollers. That way you/they can see the...
