Separate names with a comma.
@Duke of Stow i have done the suspension bounce before installing the wheel back on... and those pads are actually only a year old.. i needed one...
so ive fixed everything on the list, i took it to the MOT again and it failed on front brakes again? apparently the calipers have seized and the...
@Old rider this is my current setup. 1x friction plate 2x steel plate 1x new friction plate 1x steel plate 1x new friction plate 1x steel plate...
@Old rider no, im not using the full set of the new plates, im using the method you mentioned... @Cream_Revenge ive got an aftermarket...
so i also bled my clutch today, and its still the same. somehow even after bleeding, it feels soft... i also have an oberon slave cylinder which i...
a little off topic here guys but. Why wont my ducati start again after turning the engine on and then quickly off..? i started the bike, and a...
the problem with my old ones is that, they are completely destroyed, its all glazed and some of the fibres have literally come off...so i dont...
i havent bled the system... but then again, i havent introduced any air into the system either... il bleed it tomorrow just to eliminate one more...
@Old rider ive done your method, and it works for a few minutes, and when the engine gets hot. BAM. its draggin like a cunt again.... here are...
ive done the quiet clutch mod, but the stack height is too large with the +1 old friction plate. so instead il just rearrange the existing new...
i see.. that explains it... but i could simply eliminate this problem by just removing one of the steel plates?
Haynes Manual, and a forum. this is slightly more challenging as i cant ACTUALLY get that spacer to move to one side.. it floats in there yes,...
that guide is what i used in the first place, but there is just simply not enough clearance because of that spacer. the spacer has a notch, but...
yeah, i know that. the screwdriver didnt work.. the whole screwdriver bent...im gonna have to get dealer to change chose... robbing bastards,...
looks effective. dont have a tool like that though :| and my time is running out.
ok il try that tomorrow.
oh, well yeah ive stuck my fingers in, a little lubed up in there as well. but when i insert, it just slides off the edges as soon as i tap...
im having a slight trouble getting the bearings out. i was told to use a long screw driver from the other end, well there is a massive...
not tested it yet, still waiting for the front wheel bearings to arrive.
wot u on m8, ive done it :L just waiting for the bearing to arrive
