Separate names with a comma.
Fined for not being seen at camouflage classes.
He has an SL with the underslung caliper (and should have the rod arrangement too) so I expect it to be the same as yours, ie like the diagram...
Bloody shellfish I reckon........... .......they always make me ill.
Yes, on the other side there are two top hat type bushes and a spacer between them, as below. [ATTACH]
If the spacer washer was left out and you torqued the axle up, the left side of the swingarm will be pulled in towards the wheel so that when the...
Look at the diagram I posted above. Two bearings in the wheel and two bearings in the carrier. The tapered side of the spacer has to go against...
The cone spacer goes between the swingarm and the carrier bearing with the pointy part of the cone against the bearing inner race as Ducati Dad...
My 1997 750SS idled at 1050rpm when warmed up.
They aren't crash bungs...........they are footpegs for cruising.;)
So no ECU but Ignition Control boxes. As far as I can recall, when I wired an electric tacho on our race outfit; one wire took power from the...
Today Mrs Arq and I were discussing what we should get a relative's young son for his birthday. Mrs Arq "What about an Airfix model aeroplane...
https://www.planningportal.co.uk/info/200130/common_projects/14/doors_and_windows/2 The relevant paragraphs before Thermal Loss....either...
Broken hacksaw blade.....carefully cut the bush full length, then ease a small screwdriver down the outside of a cut edge so it bends...
If that is the case, guess what would have happened when the old frame was removed? It isn't a curved brick arch where they all act...
With those bricks, it is unlikely there is a catnic lintol in there, particularly as andy says there is a concrete lintol in there...not enough...
I changed the Laser cans on my SS from aluminium to carbon.....fairly easy job IMO.
Not necessarily.....there could be any make of steel lintol; or concrete lintol and steel angle; and there aren't any weephole perpends in the...
https://pjengineering.co.uk/
No specialist tools used in the making other than electric drill, hacksaw and files. Silly nut socket [ATTACH] Silly nut socket [ATTACH] Front...
That's because it is bent or the pivot is. You can see the master cylinder rod is skewed too. Or perhaps the rose joint is not an OEM pattern and...
