Separate names with a comma.
If it’s looks, then yes. If it’s “performance”, then spending on the suspension will reap far more benefit.
Yes mate.
Always a good idea to flush thru first. Remember to pull the bottom radiator hose, else you won't get all the old coolant out.
Yes, if it's the track upgrade you want
I think the confusion comes from the bike being marketed with “evo 2” version of the chassis control software for road use. The Ducati Performance...
Correct. The ONLY adjustment to the lever height is with the rod end. The "sleeve" is one piece. That should not be rotated around the quick...
Nope. All the adjustment is done with the rod end and it needs to be removed from the lever to turn it. The grey part is the quick shift sensor....
You have to remove the linkage to remove the rod end and/or adjust the lever position/height. Removing the rear set is the only way. The shaft B/A...
You don’t need a Ducati part as such… M6 x 20mm or 25mm iirc. I use stainless cap heads on customer bikes with a bit anti seize. 9nm torque
Depends which forks you have as to which way the screws fit. If the screws go in from the top, removing the front wheel speed sensor helps getting...
Looks great now the decals are gone. The seat unit looks well to, especially with the black pads in place :) Give the front brake a bleed at the...
To cover the range you're talking of, you'll ideally need 3. 1/4" will take you to about 20Nm, 3/8" to around 50 Nm and the 1/2" will cover the...
Try a quick bleed of the master cylinder. Remove the reservoir cap and you'll see the bleed valve. It's a 6mm hex screw head. Undo it, pull the...
Yep. If it's been fitted well, or correctly, then it should be spliced into the loom somewhere. Just make sure if you cut it out the cables are...
That’s an old BikeTrac connector.
That isn't an official Ducati procedure, It's copied from "Brad the Bike Boys" website. It's very useful for getting the TPS setting back to the...
Does anyone have a fuel tank for a 916? I'm after a Red one, in as good a condition as possible for a '94 bike we're recommissioning. Old style...
749/999 is a diagnostic SW reset. Period. It's a fixed TPS with no adjustemnt. Any adjustment to the throttle stop or balance bar will bugger the...
Don't get too carried away with where the gauge needles sit. All you need are steady needles.
Great news... It's always good to start with the basics and not to get carried away with how complicated these bikes are. They're still joined up...
