Separate names with a comma.
Moto Technica are now concentrating more on selling bikes than service. Lee does sell some mint used bikes if you're on the look out though....
When you say “belt service” do you mean an annual oil service with belts or a full desmo service? This gets confused a lot with the new schedules...
If you’re just looking at a gearing change, you have maybe 2 teeth to play with unless you fit a longer chain. 1 tooth off the front is the...
520 is simply a thinner, lighter chain. If you keep the sprocket sizes the same, there’s no change to the “gearing”. in truth, unless it’s track...
It’s possible for you to do the spannering, but wherever you decide to get it from, you need to sort a deal out whereby they will install the...
It’s just a depress on the clip to release. The fiddly ones are on the injectors and temp sender type connects
Your old ones look like DynoJet needles?
That one was issued back in August Andy.. Low numbers across only half a dozen batches of rotors. It'd get picked up during service as there's no...
There also a subtle but IMO, significant, difference in the amount the electrode projects into the combustion chamber. The NGK is recessed further...
Try a fresh ignition relay. Always worth a go.
No suicide stand on the 848.... check the mounting is secure in the cases and also the pivot bolt and lock nut are tight. There should be two...
I have similar tiles down in the work shop and get a similar thing in summer when the sun hits them thru the open shutter. There's a decent...
For gas, I uses SGS Gases. They have stockists all over the place. You pay a deposit on the bottle, but keep it as long as you like. When you...
ZDM-A11 isn't a part number. ZDM is Ducati' manufacturer code (it's present in the VIN and engine number for instance). If memory serves me right,...
There’s quite likely an asterisk before the last six numbers and at the end. On the early vins these counted as characters. That looks a pretty...
That looks awesome mate!
If you’ve bridged the stand connector, loom side, and the problem still exists then your issue is loom side. If you ground the wire to pin 38 and...
With the switch connected, can you back probe the wiring to check the two cables, loom side, are being switched? There have been two switches and...
SF848 belts are 5 years so you've got a while left :)
Not a fan of wavey tbh, but a good quality disc is the Brembo Serie Oro. You could go 330mm with spacers and improve the brakes further. Does make...
