Separate names with a comma.
If you want to start rebuilding engines more frequently, probably best to invest in a good puller. The primary is (certainly should be !) very...
If you want the multi-layered feel you probably need to find an old- school vinyl printer still using wet ink screen printing technique. Almost...
If you want a skill, get TIG and be prepared for years of learning. If you want sizzle, spatter and fully joined pieces of metal by the afternoon,...
Or @steveb123
Yes, you will need a more old school set-up. Is there anyone who tunes classic race bikes near to you?
Put it on a dyno.
Belts on desmo timing gear engines have practically no torque load on them, so the failure mode is normally different to valve spring engines.
[ATTACH] Wouldn’t your SS be around 10 years too young in any case? Don’t forget to let us know who wins at Jenga. ;)
And the world's first wind powered R100RS.
It will not flow out to empty but on initial removal and if you subsequently move it around the workshop without tipping it on its nose it can...
They don’t seem to believe you sold it Carl :thinkingface:
Can you post some pictures from the side view? I can’t tell how the wrought-iron trellis attaches to the back of the bike in the head-on shot. ;)
Hand laid fibreglass.
Overrated? :joy:
Both. The battery pack is useful for bike hopping or shorter rides just using the gloves (1-2 hours depending on setting) but for longer rides or...
I have found Keis heated gloves good. Inner glove for typical Autumn / Spring temps, full glove for the real cold.
Type “Bump stop YSS” into eBay. (Many other sources and suppliers are available). Split it with a sharp knife and superglue it back together...
No. Definitely not if the prep has been done correctly. If it is the same well known firm as I think it is, they certainly charge a premium for...
I guess you have already checked the disc buttons are free / tried spinning them and cleaning them up ? Worth trying first if you haven't. £80...
Hi DQ, did you have the vapour blasting done on the engine in frame, removed and in one piece or fully stripped down? I’m looking for the best...
