Separate names with a comma.
Hi rebuilding a 650 allazura with a wet clutch and the hydraulic actuation. I appear to have something missing! On the end of the clutch there is...
This is really miserable news. How f**king difficult is it to get it right after 4 attempts. I don't care how difficult the geometry is inside the...
I happen to have the last (?) workshop manual for the bevels ie 900 replica / Mille replica. It says 98Nm. Hope this helps[ATTACH][ATTACH]
Wow, that looks really neat. I may take this path this winter when I take it off the road for a final,Polish. May also look at an alternative to...
This was a distinct possibility but I decided to get her running first. I plan to ride her this summer then strip off all the cycle parts in the...
[ATTACH] That's brilliant many thanks for that Pete. Unlike those modern fangled bike manuals with their nice schematics for the wiring routing it...
I have tried to google this with out luck. I plan to weld up an old socket to a ground down spanner to make a cylinder head nut spanner. However,...
Could someone confirm in some detail the exact routing of the starter cable to the solenoid. The natural run appears to be across to the lhs then...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Well I knew the rotor was going to be trouble what with no castleations or holes to grab hold onto....
Hi Derek. I had the very same problem a month or so ago. I made a slide hammer arrangement. Rod screwed onto the stud sticking out. Then whacked...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Heads all done so started to put it all back together. I was sure I had a choice of three gideon pins but...
After what seemed like hours I finally got all the rocker shafts shimmed up and somehow managed to have enough correct closing and open shims for...
Finally got all the shimming correct and put the cases together. Must admit I did the measuring one shaft at a time. Ended up making up a good few...
Hi Fuel sender discussion seem to be thin on the ground at the moment so I thought I would start one! Ducati ms forum discussed the latest D...
[ATTACH] Bearings all installed. Must have split the cases about 7 times so far getting the end float right! [ATTACH] [ATTACH] I decided a piece...
Opps yes! Main crankshaft bearings. The large axial thrush bearings sitting in the steel sleep in the Ali casing (why do ducati do that? f I do...
[ATTACH] [ATTACH] umm maybe. Thing is the shield is on the outside. Anyway, decided to make some decent drifts for the bearings as sockets don't...
Decided to start popping out the bearings in the recently blasted engine cases. When I popped out the two main shaft bearings ( the ones in a near...
Hi thanks for your real world information itiejim. The engineering shop man said they rarely need to do it but is trying to get a quote from the...
I agree, one would hope so. It's just got to HT Howard who seem to be competent (anecdotally collected information) I am speaking to them...
