Separate names with a comma.
OK, first question 1) Are you loosing water from the cooling system? Check the header tank level. Next, from cold, remove radiator cap, start...
Hi, I do not really know the 999 so this advice is general but may help. The white scum is indeen normally an indication of water in the oil. If...
Having a quiet day at work has given me time to stare (sometimes blankly) at the wiring diagram again. So, in addition to the fuse I have a...
All wiring to ecu previously continuity checked.All sensors too. I will certainly try a new fuse and at the same time inspect all connections in...
Thanks, got it, fitted it, set the gap..............same. Now trying to figure out ecu connector disassembly so I can inspect sockets closely.....
Thanks final edition but I am 99.9% confident wiring and connections ok. Hmmm finm, wasn't my finest moment.
Yes please. Can you text/call me 07929268722. Cheers Steve
Oh. The original one in my bike was Bosch 0 261 210 124.. Which is same as Fiat Bravo/Brava 1.2. Hence I have my locally sorced one from Unipart...
Do you want to sell it/rent it?
Thanks. Wire to wire, wire to ground/shield ok. The timing sensor I was supplied with locally is a Mageti Marelli ne (the original being Bosch)....
Same effect turning back wheel in gear. Wire loom all looks good with no chafs or other visible damage. Haven't tried insulation check wire to...
Don't know, not had one apart (yet!). Just had look in parts catalogue but couldn't find it. Dealer 66 quid per hour and will start from...
Tried another timing sensor (CPS), still only fires once when cranking. With CPS out (but still connected) it will spark each time if a piece of...
That gives me more confidence finm, 860 +/- 10 percent at 20 deg C is figure I have from Bosch data sheet. Is my next step to change it.
Thanks, all connectors previously checked and all wiring and sensors.
Well, latest is I have tried the ecu and it now gives one spark from each plug during cranking or turning the back wheel in gear. Timing sensor...
Yes, thanks for that.Have checked all ecu and immobiliser wiring and all the sensors plus condition of connectors Checked voltages where required...
Thanks Derek. Confirmed that, key recognition fine. However, didn't expect nearly 12V on key lock line at same time after turning on (ecu body...
Anyone know what the voltage should be to the ecu body connector pin 17 keysense?
Sidestand switch checked out ok, the starter issue was purely coincidental and turned out to be a loose connector on the solenoid. So, back to...