Separate names with a comma.
That's OK cos apparently evilbay says they have been posted .
Just bought a set of exiges leads for the 1098 so hopefully the bastard will start easier.
I recently got hold of some genuine Ducati mirror extenders which I have fitted. You can see behind much easier for sure and I don't think its...
I thought I would keep the bin brigade happy. I don't really fancy bar end mirrors as I would also like to retain the indicators in the mirrors...
[ATTACH] So the standard mirrors are quite shit and shake about and poor rear vision. Are there any decent quality replacements available...
Just for reference ferracci.com still list the 94mm pistons for the 853 conversion and are on sale at the minute for $420us
I recall from memory that if you use 916 pistons on it then the cylinders need skimming as the throw on the 748 crank is less, but if you buy 853...
Definitely bleed the clutch fully first. Is the slave cylinder standard or aftermarket ? The aftermarket ones usually make it harder to select...
I've used a company before called big red. Very good as they offer a variety of different finishes .
The 748 is m12*1.5 . I assume the 998 would be the same. I purchased the high performance rod ends ones from McGill Motorsport. I would...
In regards to a starter motor have a look at the wemoto site as they are quite a good company.
I bought one from an Aussie company called racecon on eBay which was around $90. I think its just a generic one a few people sell but fitted spot...
Power bronze do a plastic one I recall, also I think skidmarks??
Try fitting the spacer. I had this problem on a 2000 model. Spacer not required allegedly but it was.
Or could you not get some dry ice and put them into that for a few hours and you probably won't need to heat up the engine cases.Your boc gas...
I bought some pyramid parts ones for my 748 as it comes as a complete kit with upper and lower taper race bearings and seals. The bearings...
$50 and a cherry ripe if u post it to oz !!
Flatshifter.com look like they do what you need.
[ATTACH] I built this about 14 years ago. Formula 27 with a zx9r engine in it.
Your best bet would be to have a look on some of the kit car sites specifically at lotus 7 style cars like Westfield etc as putting bike engines...
