Separate names with a comma.
Why not? Worth a try. Try checking the LT coil wiring as well as those from the pick-ups......maybe the pickups have got reversed sending the...
NGK plugs should be DCPR8E (either 4339 or 4179 depending on the plug cap type.....4339 has a removable nut, 4139 nut is not removable) I fitted...
It is odd IMO that both spark outside but possibly break down inside. Even a poor spark should get some sort of bang unless the coils etc are so...
Thanks Chris.....the ones I removed from mine were in fact a bodge of up the rubber caps with the carbon leads.....it was no wonder they wouldn't...
Even the later black coils were better than the light grey ones. If not screw-in HT lead type, then the leads are most likely carbon ones which...
They are the OEM type that were fitted to mine. Junked straight away for NGK caps.
I would definitely get rid of them asap. They caused no end of trouble to my Guzzi and that was in the 80s. But I'm not even sure if they were...
Why does this bloke keep popping up? [ATTACH]
I used to go there too, Noobie. In fact, even from the very early days, late 70s and 80s. Went several times after 2008, but reduced how many...
You know what? I reckon it doesn't really matter which party gets into No.10. We are all still going to get stuffed by whoever wins.
When a carbed SS doesn't want to start and run properly, but just fires for a few seconds or doesn't fully get going; it is fairly common to find...
Pump always runs. Wet plugs suggest flooding, but unless it is running out of the overflows maybe it isn't that. When the float valves shut,...
What is the matter with Swinson's hands? Looks like a puppet with an amateur pulling invisible strings.
It may be different in NI, but in the UK mainland, Oftec have no legal powers over the end user / customer, only the installers. Installers can...
I think I probably am / are..... Look at what the unions did to the UK......... It was they that buggered the car industry; coal industry (or...
So train drivers are now in the same 5% top bracket as local authority CEOs (town clerks....who would have thought it, eh?) and lawyers? There...
One tube of Solvol Autosol; couple of rattle cans; bit of old sandpaper; half a tin of turtle wax....... ....Job Done (as Ed would say) If you...
I have a 240V Metabo mitre saw without the deck. It wasn't used very much, so the motor and the guard should still be AOK. Basically the bit...
It also looked like this....about two years before I did the paint job. [ATTACH]
Standard / OEM dual seat and pillion cowl. I designed and did the paint job. OEM wheels.
