Separate names with a comma.
Are they fully adjustable Showas? I used Motul FL10 in mine. Seals should be obtainable from most bearing and seal specialists, some online;...
Why not get a good hanger so you can use it as a pattern and have a pair made in stainless steel? Making the set the same as mine may not work...
The greater the float level height is, the lower the fuel level is......this means that the pilot screws need turning out more. They are all part...
Of course........But I still think he is right. Briefly, Gina Miller's case argued that prerogative powers cannot be used by the PM to over-rule...
When you assembled the carbs, did you 'pre-balance' them? Because if you didn't they could be way out. The easiest way to do it, is to use a...
I have been reading what is published of the legal argument that Robin Tillbrook (English Democrats) is putting forward in an attempt to prove we...
14mm seems to make the pilot circuit and low range revs run weak (hence 3 turns out or more on the screws). That's why the bikes can be pigs in...
When Remainers die (Leave), do they demand another go (Remain)?
Find a 1/2" or 3/4" wide sharp wood chisel or a small wood plane iron, clamp the tube securely in a vice, heat the bearing race a bit. Insert the...
My 750 would tickover at 1000rpm with Stage 2 DJ, Laser cans, OEM filter and no trumpets on the airbox. Brads notes are remarkably similar to...
Firstly, I reckon you should have a Stage 2 Dynojet kit, because the Lasers are straight through. If you have the airbox trumpets fitted, take...
I live under the flight path between RAF Wattisham and RAF Woodbridge..... ...not that many planes but plenty of Apaches. Arrows bloody hurt.
We still haven't left yet, y'know.............(Loz)
Ian, I have only learned from research......some of it is guesswork, so the only way to be certain is get the bike on a rolling road etc.....(as...
I would be inclined to set the float heights at say, 12 to 12.5mm, probably the latter. Trouble is, the measurement is arbitrary and there are...
You need a Stage 2 kit, with the larger size jets that come with the kit. The Dynojet info below should help. But don't forget, the Dynojet kit...
Top wire also acts as a lightning conductor hence the bloody big bang when it strikes.
I learned quickly. Stuck a patch of self-adhesive Velcro on the leathers (Hook side on the slider). Worked fine, but it bloody well hurt if I...
And why not, eh? Sticky as hell.......not so bad in a mix, but neat Wynns makes a mess. I made a mistake when I rebuild a Guzzi Le Mans engine...
The insulator length will provide the answer to the safe distance.......if the insulators are 4.0m, the cables are 400,000 volts and the safe...
