Separate names with a comma.
Thats good to know that they do a refurbishment Shaun. I saw your thread. I am thinking that I will try putting a G clamp over the unit to prevent...
The MPL (aftermarket) slave is off. I will give it a good clean. I don't want to take the bike out for a run. I don't expect I will be able to see...
Hi. Just in the middle of cleaning up my 999 and found oil is leaking from the couch slave area. It is a bit messy and has spread around the crank...
No, the MPL clutch basket is seized because one of the titanium wear rollers has somehow been dislodged and is wedged between the engine case and...
Engine wouldnt't turn over. Even with spark plugs removed. Belts were ok. The clutch has seized!!
Ha Ha :). Well the positive/negative was just a slip up. Terminals are clamped up tight. I dislike electrickery but would like to have a stab at...
tried the negative to footrest and it didn't make any difference. I noticed that the battery terminals and wiring by the terminals were getting...
Ok, so that's positive on battery to foot rest. That is straight forward. How are other earth leads checked that you mention?
The battery is in good condition and there was plenty of electrical power. Would a faulty engine speed sensor not create an error code and allow...
Hi, I could do with some advise on how to cure my bike. The engine was running perfectly and then it died at about 70mph. Plenty of fuel. It...
Yes , I agree I am missing out and potentially I made a bad decision! However I left the bike with the supplier for 4 weeks (one of my weeks of...
Well the bike was returned to me with little or no improvement after being sent to a Ducati dealer. I was not happy with it and did not want...
I would love to get a top box fitted as well but as far as I know Nonfango kit stopped being available years ago :(. The shop that has my ST told...
The bike is back at the shop that supplied it. I can get some pictures to you if/when I get it back but I know the panniers and frames are...
I thought the same about the panniers. I don't know if the gearing is standard. Obviously this is a different engine and set up but I assume there...
I have been looking a long time to get hold of one of these for touring. I have a few issues and would appreciate any comments form other owners....
Valve is now fixed. The shrader valve tang was broken off! Maybe the valve was cross threaded when assembled but forced in with such force that it...
The front is conventional. The rear doesn't have female thread to accept the threaded valve:Wideyed:
My rear tyre deflated 2 or 3 times and i could not find any problem with the tyre. It pumps up ok and holds pressure but I can't trust it. I had...
Well I have not got an ST4S yet but it seems almost a pointless exercise searching for one without this paint damage from the 2 replies so far....
