Separate names with a comma.
I just bought it.
https://www.shapeways.com/product/HHRNRQLJ8/ducati-multistrada-dvt-kettenradabdeckung-v2?optionId=59823229&li=marketplace Not cheap, but I will...
Can’t remember. Its 3D printed. Wasn’t cheap but means I can get of that awful bloody thing strapped to the swing arm and finishes it off. If I...
If you can manage that, you probably posses enough logic to convince you that the full system is the way to go!
@Alan Murphy all four hooks retained. Two on lower section and two on the enduro part.
You’re right, I’m missing part 3. I’ve just been to have a look and whilst I think you can get away without fitting it, I’ll order it all the same.
Can’t see it burning a smaller plate.
I’m hopefully out for a ride on Wednesday so I’ll get some full shots.
I’m running a slightly less than legal plate. The edge goes black, but that’s it.
I’m not sure these pictures are much different, but here goes. [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] Let me know if you want...
I’ll get some pictures up later today.
That’s all you need. It’s a pretty simple job, about 8 bolts. Just be careful routing all the cables back the way they were. I think Evotech...
No mate, unless you owe him £50, then yes and I’ll pm you my PayPal address.
I’ve only ridden a 950 when mine (1260PP) has been in for a service. It was a bloody nice bike, very neutral handling. I found it particularly...
I’ve just fitted an Enduro plate hanger onto my 1260PP , so I’ve done exactly what you’re referring to. Four bolts underneath the bike and four...
So you’re recommending @OoRanoO to go in dry?
In my limited experience of fitting decals, a couple of drops of washing up liquid in a spray bottle of water is enough. It enables you to move...
Desperate times!
I thought it didn’t need any lubricant at all and only adjustment needed every 8000 miles. Which is a bold claim. Anyway, I fitted one these:...
Try speccing a Streetfighter and you soon get near that figure.
