Separate names with a comma.
hi all Just fitted some small LED indicators to the bike. All 4 were working ok when I wired them up. Fitted 2 resistors, one either side and the...
Conquest carbon? Been happy with his stuff and discounts available for forum members.
Cheers pal. Don't need the carrier, (I've got an AFAM one) just the flange/cover for the small hub. Cheers
Hi Russ. Would you have a rear sprocket flange for the 748/998? Thanks, ian
Cheers, mate. Ended up buying a pair of wolf race jobbies in the end.
Exactly the same mate. Not much between the 3 except for capacity... Best mods I did for comfort on my 848 were fitting a superpole seat. This...
Just been looking at these as they seem decent enough and I'm after a new pair. Anyone knows who might stock these round the London area? Cheers, Ian
Hi Jen. Hoping to get down Saturday with @El Toro. Only thing stopping me is the young un's football tournament Saturday. Hope to make it down,...
As above... if nelly doesn't have them maybe speedycom can get them.
Hi mate and welcome.
Do it mate. Listen to the voices! :upyeah:
Same mate. Just look at the calliper mountings on the fork bottoms. If they are the thicker ones, you'll need 10mm offsets. The thinner ones use...
[ATTACH] Hi red. No leaks from the header tank as of yet. The water or oil at the bottom of the rear cylinder doesn't seam to get any worse but...
Ya greedy buggar. You already have 3! :)
Don't know about the head gasket. I'm not losing any coolant but there's always a bit of liquid, (tiny drops) at the bottom of the rear cylinder.
Thanks again lads. Going to see if I can get any air out of the system first. The thermostat could also be a cause. But I think the engine runs...
Thanks lads. I'll have a look at it later. I cleaned up the contacts on the temp sender but maybe didn't do the wire... but the temp needle...
That's cheap! :upyeah:
evening all. Noticed that on the last ride out and also today, the temp gauge suddenly drops to 40 or 50 degrees while riding at a quickish pace....
Ok. Just wondering if the pushrod went all the way through to the end stop in the cap on the other side... did you remove the pressure plate? Ian
