Separate names with a comma.
There are 3 o-rings with this number 93827.0114 that fit into recesses in the RH crankcase, but physically there are 2 different sizes! They are...
While researching how much preload ppl recommend, I came across this post, the engine characteristics mentioned by 1198sptx and ducatista4life are...
I was thinking 0,15mm, but still gathering info :-)
I decided to pull off the conrods, even though there was minimum movement, just as well, pin was not really damaged but needed to be polished....
Yes but I got a deal as the salesman kept me hanging around.
Well, to-day my new mains arrived from Ducati Italy, same ID as the ones from 123bearings.co.uk 7207X2ETN and 7307X2ETN - RHP and made in England:joy:
Ah well, because of the doubts raised through this thread, and other threads and forums, then on the advise of Ducati John to go with OEM...
Actually, not cheaper than Ducati, just got a OEM quote for £170 delivered, 123bearings worked out at £176 delivered.
I just read on an old forum post at http://www.ducati851and888.com that the ETN is a lower grade than the TB, which is a precision grade bearing...
Ok Ok here's my problem now, much doubt creeping in after reading more posts following actually buying the bearings mentioned above in the...
No but cheaper than from a Ducati dealer I'm sure.
[ATTACH] Not sure about prefix, but you once said "Made by RHP Bearings. 7207 X2 ETN and 7307 X2 ETN" :)
Just like I said earlier this evening :-)
Never could get the primary drive gear off the crankshaft with the tool I got, I changed the 2 timing shaft bearings, some seals etc, and put the...
The last consulting job I had in the oilfield was around 1600 a day before I retired, forget the free room and lodge I can sleep in my van:zzz::yum
Here's the latest, a video of the crank and right side bearing.. [MEDIA]
Sounds like a good plan that for the future, to keep on top of the corrosion in there.
I guess, but he dosn't say much in this thread, just one important word :upyeah:
Looks like so far, bless him.
A doddle when you have the right tools Steve, thanks.
