Separate names with a comma.
Yes I thought that as well, but they are thrust roller bearings for side thrust, dont know if that makes a difference? To be fair, there is quite...
[ATTACH] Its had old belts back on, new exactfit and new Duc belts set at different tensions using different methods, I am done with belt...
If you read the thread at the very top, I fitted those belts and used that app in the beginning ;)
Well, bike is back together with the new Ducati belts I mentioned above, tensioned with the 45 deg twist method. After replacing the bad...
Yes and yes
Well a long drawn out wait on off belt side cam bearings, EB seller cancelled my order after 10 days as he could not supply them! Bought again...
As the original noise from my engine was constant (apart from the rev range), with the clutch in, clutch out, and riding, I am now pretty much...
While I was doing all of the above, I decided to renew the 8 camshaft bearings, seeing as I had already removed so much stuff from the engine,...
Yes I cannot understand it either apart from the bearing was loaded and lasted a good while before failing, that's the only explanation I have.
After more checking, realized that the thin ring, is the same thickness as the snap ring, makes sense now as both the outer races against the snap...
No, not as I could see without splitting the crankcase :-)
Ok finally found something out about the noise hopefully. When I pulled off the clutch assy, behind the clutch driven gear there is a spacer...
Yep
What, wooden stake through back wheel spokes, as brake wouldn't hold it?
I am sure the CCW belts are good, just had to try the old ones again to eliminate stuff, the bearings only have a hundred miles or so on them, but...
Haha, have you ever tried getting one off, jesus it was tight, 1/2" drive air impact gun rattled it loose though fairly easily, need a new nut...
Yeh I did that in the beginning, most of the noise was at left side middle, but also trasmitted towards the horizontal cylinder head.
No, just put it back together :-) Yeh I kinda knew you were tekkingt piss earlier :-) The water pump bearings are good as well. Cheers.
Exige (Stu), your replies are a bit confusing and appear to be historical content. Exactfit belts that I bought from you, also the 4 x SKF...
I never said, but been there, pulled the 2 bearing caps all looked good, bearings perfect and cam ends as well, think I will rebuild the bottom...
