Separate names with a comma.
Thanks Michael, I will pass as these are for sports bikes and around 10mm shorter than the ones I need (adv type) but as temps are dropping...
PM sent (Winter is coming!)
And re-anneal (copper) or replace (steel) the banjo washers.
Most 11mm sockets with 1/4 drive are thin wall enough to fit and are a safer bet than an open ender regards rounding. But if you only have that...
Never had a fail (not even close) with ours and used any number of exhausts, all effectively straight through.
[ATTACH]
Pretty much everybody with these bikes I expect. With my dual injector 996 I reckon I could outdo Banksy with a shadow print…
They are definitely not universal fit. The reason you need a chain specific link is that the size of the pins and corresponding side-plate holes...
DQ’s advice is sound. Long shot but I also think it’s possible to inadvertently stop the piston returning far enough to accept or release fluid...
You may have missed the boat a little on this one. OP last seen 3 years and 38 weeks ago.
I know, surpassed my expectations, but if the top bidder drops out, I might still get a second chance offer :laughing:
I think the correct torque on the nut is plenty to seat the spindle to the fork and pull the wheel into the correct position. The problem with...
No. The spatial relationship between the axle, the wheel and the LH fork is absolute. The RH fork floats on the spindle until the clamp bolts are...
You must have been unlucky with your vehicle speed and the distance to the next speed signs. Worth challenging if it would have lead to a loss of...
I allows a “gentlemen’s measure”. I.e. So long as they weigh up at min weight plus a few, even if the tyres look like liquorice Catherine wheels,...
That does not work anymore for a few years as the stewards can choose any of the tyre sets used by that driver as a representative set (so if they...
Not well enough! :)
Yes - fast deprec will overtake any discount but if you are keeping it long term, no real issue Yes - if you have a recent one bought at list, you...
It’s normally said to be far (as in several years) easier to stop a fast guy crashing but stay fast, than to get a steady guy to be fast without...
Check the valve timing is right, if it’s had new belts.
