Separate names with a comma.
Douglas top right hand side of this page is an envelope symbol. In there is the "start a conversation", he may pick up this thread anyway
Douglas, @chrisw on here may be able to answer that one
The best engine degreaser is Gunk IMHO especially to get rid of the black gunge that builds up around the front sprocket. It also cleans oil...
Sounds like a low battery (Dash says so as well) which is making it reluctant to start, the rest of it sounds just like a standard Ducati clutch...
Peter, if you get the right cans its a 30 minute job to change them. There are other cans available which are not as expensive and you can get...
Peter, yours will be 45mm at the collector. To confirm, check the part number on your collector, for your MY02 bike they are likely the final...
Are the OEM LP calliper bolts these ones http://www.ricambimoto.uk/index.php?route=product/product&path=59_60&product_id=246 ?
There are loads of aftermarket ones,...
2 recalls in the US although they are both implicated in the same outcome...
Slumdog, did you find the bleed in the reservoir, I was not sure from your posting? I did mine last spring and it was spongy and commented on by...
Also was available as a Ducati Performance branded item in black. Solid stand and gives a very easy one man operation, far better than most I've...
Brouny, last time I did mine it was a reluctant starter due to an air lock in the slave. I cleared it by filling from the top with the slave...
Rex, you can measure the "stretch" in the chain by checking its length under tension against its length compressed...
Thom, looks like it, the 999 base came with Showa but three are specified for the early spec 749s, looks like the Sachs one was supplied with two...
How are you exhaust manifold springs? , I had a similar sound (I think) from my 999 rear cylinder and it was a leaking joint on the exhaust
Air con, dissimilar metals and electricity. You have some of the conditions for corrosive effects similar in principle to cathodic protection...
Billy don't confuse Brake Bleed Connectors or Bleed Unions with Bleed Nipples, they are not the same thing. In the Factory manual for my MY02 748...
