Separate names with a comma.
Jac, have you tried asking Abba nicely https://abbastands.co.uk/contact.asp
Miika, try pulling the fuse for the indicators and idiot lights then switch on the ignition
Median average for 130 responses is 54, I suspect similar to Honda, a bit older than Suzuki, older still than Kawasaki but much younger than BMW....
Hi Matt, you should consider buying and fitting some of these http://ducatiforum.co.uk/threads/999-749-exact-start-electric-cable-kits.34560/ from...
Paul, the pump is run by the ecu whenever it senses the engine rotating but it has a mechanical overpressure bypass set around 5 bar which...
FM, you may want to send Messer a pm https://www.ducatiforum.co.uk/threads/996sps-and-748r-oem-paddock-stand.78966/#post-1665036
Same here (with a Pipercross one) and it did not make an appreciable difference on mine when it was mapped carefully. The engine is still running...
I have just gone through this with a non fault CAT N write off of my 748S which I retained the salvage on. The insurance industry (it could be...
DucV2, not advocating either option, but did you get a comparison trace after each one had been mapped correctly? Otherwise the 10 minute...
Ian, maybe, thanks for flagging the post
Chris the MY02 heads were called Testa Bassa (Dropped Head), I think the barrels are the same. Testasretta (Narrow head) is the 996R/998/999 and...
Or you can buy a decat pipe
Joe, there are plenty of threads on here which will advise if/when you have problems bleeding it, often the calliper needs to be held upright to...
Ian, you have a pm
Matt, have you tried calling Rich Llewellin to see if he has any ideas
Part numbers come back with M6x1mm for the Slave and M10x1mm for the Master see these links https://www.corsasbk.com/product/18710021a/ and...
Twigger, whatever you do don't refit the alarm it won't work properly anymore and Datatool from that era were far from reliable anyway, I would...
Mark, it seems you missed the point on this post as well, BTW I know where the locking plate should sit and how much movement to expect of the...
Zeus book - If I could still find it! Still got my speeds and feeds and drill specs tables however
Paul, this explains it quite well https://blog.misumiusa.com/shaft-hole-tolerances-for-clearance-interference-fits/ sort of stuff you learn as an...
