Separate names with a comma.
Bob, did you replace the boot on the atmospheric pressure sensor on the rhs of the header tank by the steering damper. That one allows water into...
Keith, I agree but the driving point is important to the likelihood of spinning the tool, if the driving point was on a radius of say 4mm rather...
Geoff, have you considered the changes the drive point radii make to the tightening torque? For example if the torque setting required on the...
If it gets stuck or wont select you may have a problem with the gear selector arm or the return spring on that arm. Easy fix but takes a long...
Harris, lower CCA than AGM lead acid batteries which might be a problem in the winter, higher cost than the equivalent OEM (and most reliable)...
Hi Rex, glad you got it all together. For the battery terminal bolt issue it is a good idea to pack the underside of the nut when the battery is...
Rex, a little bit of knowledge is a dangerous thing which is why the charger and Li battery raised a few concerned eyebrows on this thread for...
Perry, some of the van hire companies have vans with a chock and a ramp for not much more than a normal days rental (£60), this one is local to me...
And the chain is suspiciously tight
The flywheel nut should be replaced at least every second fitting but preferably after one use as it has a slight interference thread tolerance,...
If you have the switch that is screwed onto the stand pivot bolt, unbolt it (8mm socket) make sure it is in the stand up position and stow it...
Rex, in the old days before the internet we used to have to phone the spares folks to find out about stock and delivery. These days people expect...
Yuasa are probably the best and widely available, be wary of batteries on ebay that claim to be gel (Motobats are the worst offender for this for...
Factory manual for a 1098 available for free download here...
I broke my back getting rear ended by a BMW in Oct last year and have been off work since recovering. I could barely move the bike around the...
Different parts with different part numbers each cost around 30-40p Oil screen gasket 852.5.005.1A Oil drain plug gasket 220.3.208.3A They fit a...
If you look through your factory manual they specify either a thread locker (Loctite 270 for example) of a specific type depending on its...
And you ought to consider one or maybe two torque wrenches for the up to 20 and 20-50 ranges if you bother torqueing the lower range screws,...
Mike, probably too late and apolgies to Jack for the thread hijack but this may be useful for your shock...
Tbooe, are sure it is not the original finish as the titanium grey 748Ss were not flat matt (nor were they Sennas), they were semi matt and at the...
