Separate names with a comma.
There is even a free download already linked on this forum at the top of this Technical help section...
Doogal, if you mean the slightly tapered threads into the flange I think they are 1/4"NPT, I think @Exige has them for sale as a kit.
Congrats on having such a clean MY02 748E that can easily be restored to original spec in such good condition. Non original bits include the...
Must say I have never seen a 998 with two holes but the fiches clearly show different types for the various part numbers.
I thought the crossover from T95 to T93 was early MY01. The S models in both MY01 and 02 share the same engine as the E and are usually 93T
There are a whole bunch of variations of part number listed 48410371A 996R, 998R, 998S Bayliss and Bostrom and 998 described as B Air Conveyor...
Just checking, jump direct to the starter + and an engine ground from another battery? Does it spin over any better with the plugs out?
Have you eliminated the possibility that the battery is the problem? A simple check with a voltmeter will give some indication, jumping it does...
Paul, its an M3C ecu used to be Siemens branded but now comes under Continental Group a small part of which is tyres, they do all sorts of stuff
I agree with Ian, may be 76410841A (used to be 079772068) and according to the fiches is used in a number of locations on the 748/916 as well as...
I'd stick with the allen heads but not use plain steel like yours appear to be. Not sure whether they are point, flat or cupped, the length or if...
Daimatt, do you mean this one? [ATTACH] That's a T7 torx head and it needs a little heat to soften the thread lock and reduce the risk of the...
Dunc, have you had the bike mapped properly?
1973 Mobylette 50v, later ported and tuned for a laugh (Cost my dad £29 for my 16th birthday) 1973 1973 Suzuki B120P in a box (cost £40) 1980...
Andy 19410191B tracks back to MY04 or MY05 999RS pressure plate, 19410121A to the MY03 998RS your number does not come up in the search
Adam, the tricolore panels all tend to have AG at the end of the part number, the one you list above ending in just A is the unpainted nose cone,...
Did you push the fast idle button in? If your battery is new did you charge it fully before using it?
On the start video I am another that says do not touch the throttle when cold although some bikes do need a bit, an adequately set up 916/748/996...
It would seem so http://c8software.com.au/shopv2/mornington-iframe/part/ducati/040017030#top but it is now stocked as 88641181A but listed for...
PM @Exige on here, btw its the first hit on ebay if you put "Ducati fuel o ring" in the search box. You might get a subscriber discount if you...
