Separate names with a comma.
Mike, if you need more info and some help to find this a good home try these folks http://www.lathes.co.uk/lorch/ or email them [email protected]....
That strainer (42710031A) is not shown in any of the 749/999 books but is shown in all the 748/916/ST etc ones, not sure its the same pump assy
Derek, the books and current fiche show it as 42540101A which I don't think fits the ST2/3 etc but the OP asked for a strainer not a filter, not...
Skye, the heat shield is fixed to the battery box with 4 self tapping screws. When you are down there, there is a relay that sits in the muck...
Do any of these help https://www.ducatiforum.co.uk/threads/free-ducati-owner-workshop-manuals.593/page-7#post-1309624
Deano, if you need to ask I would strongly recommend getting it done, probably where it was MoTed. They are quite easy to do if you know what you...
Messer, I sent you a pm
If its a white two way Molex its probably an optimate lead, although those are usually located by the engine breather. There is also the ecu fly...
There are suggestions above that the earlier standard exhaust systems won't fit the later style testabassa 748E/S motor, they fitted perfectly...
Skye Hook, did you actually swap the coils and run the bike to see if the fault stayed on the front or are you just assuming that the coils both...
A pair on ebay with the correct part number visible here (the current generation)...
CT moto link here...
Stu, I will have a look tomorrow morning, I thought they were Toyo but I may be wrong
OK, but here is the packaging for the part number that supersedes 751622566 which are the front wheel bearings for my 748 (that I bought...
Stu, I was always told not to fit tighter clearance bearings than the OEM fitment if the bearing will warm up due to speed or extended running, or...
Hi Felix, does the horn and pass button work? Also the microswitch for the front brake connects to the loom in that bundle just below the RH...
Roadtrip, the Ducati 6x20mm (and 10mm) bolts are used for loads of their bikes for many years so should be easy to find if MR don't stock them
I think Paul is correct, the spacer is a simple turned cylinder, part number is 71610761A and is not listed on bikes fitted with an oil cooler,...
Andy, the owners books for various Ducatis inc Multis specify setting/checking the coolant level with a cold engine and include a warning note on...
Same discs are fitted to MY02 748Ss (not E or R) AKA Snowflake or 49240101A if anyone is wondering
