Separate names with a comma.
Talentless, I can send you a 999 factory repair manual if you want one for reference and common torque settings to the 749, its a full function...
I think its an earth fault between the front loom and the frame/battery - which is causing an unwanted backfeed down a sensor line such as the...
Most likely you have disturbed the wiring as suggested already. You will need to check the security and cleanliness of the headstock connectors...
I have parts books for 749 and 749S issued in Oct 02 and Mar 03, and they both show the oval "Eccentric", what it says online may differ. Not...
I don't have a parts book for Exige's special so who knows
Parts books from 03 749 to 06 999 all have the same pivot shaft part number and show the same oval washer with part number 75610071A, 748 pivot...
Jack, I am one of those folks that prefer the original clear screen as it forms an important part of the design of the fairings and is integral...
Hi Alistair, I am really after the clear OEM one, thanks for getting back so soon with your kind offer. Hope all is well with you Andy
Wanted for cash or Paypal F&F, OEM screen for a 748, 916, 996 or 998, anything considered. Needed to replace the one my foot destroyed in Oct....
Carlo, spec from MY02 factory manual and 916 parts fiches MY94-98 is 1.25mm pitch, part number in the various 916 parts fiches right up to the...
Carlo, the sprocket flange/cush drive nuts on the 748/996 are M10x1.25, I don't think they changed from the early 916/748 to later sprocket flange...
Chris, out of 10 hoses in the 2003 parts books for each bike, only five are listed with the same part numbers. Two of those are smaller diameter...
I agree with this one most likely using the wrong torque setting. The bolts should be threadlocked and only get 13Nm, max 15NM torque (not 15 ft...
Messer, You could try 77913711A which are the fork lower pinch cap screws for Ohlins fitted 999s and some others, may be worth asking for the...
it looks like a T7 torx head on the set screw and both the set screw and the tube are Loctited in. There are videos on you tube [MEDIA] and...
If it is this one...
13mm repair kit here...
With dodgy third party wiring and an indicated immobilizer fault, seems like you need to start in more obvious places. How is the immobilizer...
Mine too and it has so done for over ten years. For the o rings you need Viton (green) ones, which were supposed to be supplied with the fitting,...
Connor, I replaced my OEM steel one (on a 748 at 14k miles with 2mm notches in the basket) and used the Barnett alloy basket with stainless steel...
