Separate names with a comma.
If you want the feel of the carb motor converting to FI will probably loose that. Stick it in the frame with Carbs and bobs your uncle .
I attempted to purchase an R a few months ago but couldnt get any Duc dealers to offer anything for my trade in (even though one of them sold it...
I'd had a regular search for the early alternator case on ebay for quite a while and none appeared here in the uk, I'd seen some in the states but...
Bought my Superlight an Italian stablemate.[ATTACH]
I've got a shim kit (early 2v 8mm) and it only gets you in the ball park of the adjustment usually. Ie one shim will give too loose adjustment and...
Plumbers pipe wrench has worked a treat on the bloody too tight from Ducati/dealer filters I've had to undo.
One thing that may not have been mentioned is if you need to change the closer shims/remove or replace collets then care is needed when levering...
You don't need a paddock stand for a bike in a van, just suitable tie downs from the bike radiating outwards, hold the bike upright and tighten...
I've a pair of waterproof summer gloves Rukka Appollos, and whilst they are waterproof, they are far to hot for summer (above 20degC) use as they...
Start again with belt replacement procedure it looks like you didn't align the cam when putting the belt on. Some of the cams will rotate...
Pm sent (or at least I think I have if start conversation is a pm on here?)
I've recently ordered a speedo cable from my local duc dealers for a mid 90s 900ss and it was only 15quid. Why don't you try the local dealers it...
This is what I get via that link content is currently unavailable This content is currently unavailable
Paul Smart Sport Classic. I bought it as a potential superlight and found the handling poor probably due to rear suspension architecture and...
A 94 should be 20mm but that doesn't mean there wont be parts match specials coming from the factory with 17mm older axles, crash repairs with...
I used to run Monster S4 5 spoke wheels on my old PS sport classic. There was no machining needed, all I did was use the same brake discs and...
Some dyno charts on Brad Blacks site. original 05 999 (has s cams as stock from memory) BikeBoy.org - 999 ’05 Model and some tweaked 999s...
Rode my Super Tenere to the Italian Bike and Car day near Edinburgh. Took the S10 as I was picking up a set of SS forks and yokes and needed to...
I've got a rwd (current version) Vito medium wheelbase (ie not the short or extra long one) and door hieghts are a bit marginal. I can get a...
For my sins I have to admit to owning an old one. it was all show an no go... I wouldnt buy one again, if you really have to trying one on first...
