Separate names with a comma.
Engine bolt nut 1st then hopefully you'll be able to remove the bolt. yes you might impair frame paint but its available in touch up or can from...
Ah so you want ease of access as the primary driver, we'll thats a different aspect to the actual requirements/benifits /issues envelope then......
Personally when all you have to do is cut/remove the airbox lid to get good gains on a carby 900 with jettting fixes I dont see the benifit of...
Give it's clean ? You might find something obvious like wiring damage
Because it adds a bunch of torque and hp to the midrange on the small airbox Ducs . And some top end increases too usually. Needs fuelling to...
Check the running batt voltage when you get a chance incase your rectifier did the old one in.
Up until recently I wasn't a subscriber of pukka back protectors for road riding, but a recent rideout which I didnt attend resulted in a reported...
The stuff you want is listed unde Reports. Gearing page is here BikeBoy.org - Ducati Gearing – Sprockets and Primary Drive Ratios
might be worth trying what you have fitted. , I remember my old stock 916 being over geared as std , too long for road use really (cant recall the...
15/36 according to the 1999 ducati workshop manual . I'd imagine gearing for a track depends on which track? and how you ride that track.
I'd bleed it to freshen up , recommended every 2 years anyways and not a hard job on these. I usually suffered from a leaking clutch slave not...
it more about distance than time with brakes, plus how you use them. Never had a problem with brembo pads here though. I used to say avoid EBC as...
+1 on tyres , are they old too? May have hardened etc. next on my list would be steering head bearings followed by swing arm play or worn rear...
People seem to be forgetting that even Rutter struggled to win on the 1198 (or was it still 1098R?) last year in BSB whilst Checa was dominant in...
Valve cover gaskets for the 888 as front pots ex valve cover has a slight leak , not sure the new ones will sort it as they are now pressed alloy...
is that each pulley or each bike? Ps interested in a set for a 888 (so same as 916 desmoquattro) pps what material will they be made from?
yup well it is for me sofar. did you find the problem or was it one of those we've clicked everything and its gone away ones :)
Used one for the 1st time recently and if there wasnt an assistant nearby it was getting close to have a pile of goods left on it and no sale....
Seems faster to me cheers. Though my avatar has failed to appear and I cant update it either...
Yup very slow here too, dont think its load as its slow even at times I'd have thought were "quiet" time. :/
